Specifications; Standard Accessories; Battery Removal/Installation - Hitachi CR14DSL Handling Instructions Manual

WARNING
If an electrically conductive foreign object enters the terminals
of the lithium ion battery, a short-circuit may occur resulting
in the risk of fi re. Please observe the following matters when
storing the battery.

SPECIFICATIONS

Power Tool
Model
No-load speed
Stroke
Capacity
Rechargeable battery
Weight
Charger
Model
Charging voltage
Weight

STANDARD ACCESSORIES

1 Charger .......................................... 1
2 Battery ........................................... 2
CR14DSL
3 Battery cover .................................. 1
CR18DSL
4 Plastic case .................................... 1
(2LSCK)
5 Hexagonal bar wrench ................... 1
6 Blade (No. 103) .............................. 1
CR14DSL
1 Blade (No. 103) .............................. 1
CR18DSL
2 Hexagonal bar wrench ................... 1
(NN)
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery
<BSL1430>
CR14DSL
Vinyl Chloride Pipe: O.D. 90 mm
Mild Steel Plate: Thickness 10 mm
BSL1430: Li-ion 14.4 V (3.0 Ah, 8 cells)
3.3 kg
UC18YRSL
14.4 V – 18 V
0.6 kg
<BSL1830>
○ Do not place electrically conductive cuttings, nails,
steel wire, copper wire or other wire in the storage
case.
○ Either install the battery in the power tool or store
by securely pressing into the battery cover until the
ventilation holes are concealed to prevent short-
circuits (See Fig. 1).
0 – 2100 /min
28 mm
Mild Steel Pipe: O.D. 90 mm
Wood: Depth 90 mm
BSL1830: Li-ion 18 V (3.0 Ah, 10 cells)
2. Blades
(1) No. 1 Blade
(2) No. 2 Blade
(3) No. 3 Blade
(4) No. 4 Blade
(5) No. 5 Blade
(6) No. 8 Blade
(7) No. 9 Blade
(8) No. 95 Blade
(9) No. 96 Blade
(10) No. 101 Blade
○ (1) – (9): HCS Blades (HCS: Highspeed Carbon Steel)
○ (10) – (20): Bl-METAL Blades.
Refer to Table 5, 6 and 7 for use of the blades.
Optional accessories are subject to change without notice.
APPLICATIONS
○ Cutting pipe and angle steel.
○ Cutting various lumbers.
○ Cutting mild steel plates, aluminum plates, and copper
plates.
○ Cutting synthetic resins, such as phenol resin and vinyl
chloride.
For details refer to the section entitled "SELECTION OF
BLADES".

BATTERY REMOVAL/INSTALLATION

1. Battery removal
Hold the handle tightly and push the battery latches (2
pcs.) to remove the battery (See Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (See
Fig. 2).
English
CR18DSL
3.4kg
(11) No. 102 Blade
(12) No. 103 Blade
(13) No. 104 Blade
(14) No. 105 Blade
(15) No. 106 Blade
(16) No. 107 Blade
(17) No. 108 Blade
(18) No. 121 Blade
(19) No. 131 Blade
(20) No. 132 Blade
9