Specifications; Symbol Glossary - Philips RESPIRONICS Sami the Seal Instructions For Use Manual

Standard specifications
Electrical requirements 120VAC~ 60Hz, 1 Amp
Power wattage 120VA
Thermal overload protector Resettable thermal fuse; functioning temperature 130 C°
Performance Average flow: 6 lpm @ 10 psi
Maximum pressure: 29–43.5 psi
Replacement intake filter Part no. 1083128
Size 10.5" L x 6.1" W x 8.9" H
Weight 3.5 lbs.
Regulatory listing Safety: IEC 60601-1
EMC: IEC 60601-1-2
Operating mode Continuous
Operating temperature 50°F – 104°F (10°C – 40°C)
Operating humidity RH 10% RH to 95% RH, non-condensing
Operating atmospheric pressure Performance may vary depending on altitude above sea level, barometric
pressure and temperature
Storage/transport temperature -13°F – 158°F (-25°C – 70°C)
Storage/transport humidity RH 10% RH to 95% RH, non-condensing
Storage/transport atmospheric pressure P 690–1060 hPa

Symbol glossary

l
ON (power)
~
O
OFF (power)
SN
Serial number
Atmospheric pressure
Separate collection
IP21 Housing Ingress Protection rate: IP21 (protected from the penetration of solid bodies with dimensions greater than 12 mm.
Protected from the penetration of vertically falling water drops).
ATTENTION Class II, double insulated
Alternating current Type BF applied parts
Follow instructions for use
Indoor use only
Temperature limitation
Humidity
ENGLISH