Honeywell ScanPal EDA71 Series Quick Start Manual page 14

About Provisioning Mode
After completing the out-of-box set up process, Provisioning
mode is automatically turned off. Scanning a bar code to install
applications, certificates, configuration files, and licenses on
the computer is restricted unless you enable Provisioning mode
in the Settings app. To learn more, see the user guide.
Scan a Bar Code with the Scan Demo
For optimum performance, avoid reflections by scanning the
bar code at a slight angle.
1. Swipe up on the screen to access all apps.
2. Select Demos > Scan
Demo.
3. Point the computer at
the bar code.
4. Touch Scan on the
screen or press and
hold any Scan button.
Center the aiming
beam over the bar code.
The decode results appear on the screen.
Note: In the Scan Demo app, not all bar code symbologies are
enabled by default. If a bar code does not scan, the correct
symbology may not be enabled. To learn how to modify the
default app settings, see the user guide.
13