For more information or technical support please visit: https://accent-systems.com/support/ COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF ACCENT SYSTEMS, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES.
TRK2XX Initiation Manual 3. Introduction TRK2XX series are a family of low power tracker devices conceived to have very long battery life without recharging or replacing the batteries. This document is a guide to set up and maintain TRK2XX devices. TRK2XX family is composed of 2 models, TRK210 and TRK230.
TRK2XX Initiation Manual 5. How TRK210 and TRK230 work TRK210 and TRK230 devices are a low power devices that wake up every a fixed interval to perform a GPS location/WiFi location. WiFi location is operated in client mode, scanning nearby Wi-Fi network to have the location information as a sniffer. When the localization information is collected the device sends this information to the cloud platform using some of the cellular communication technologies that the device have, the technology used (GPRS,NB-IOT or LTE-M) is selected in function of the availability of it in each...
TRK2XX Initiation Manual 1.5mm HEX key Figure 1 - TRK back cover bolts position. The steps to reinstall the back cover are: 1. Check the back cover position against the top part of the TRK device. See Figure 2 for more details of correct alignment.
TRK2XX Initiation Manual 3. Insert a Micro SIM (3FF) in the SIM card holder. 4. Close SIM card holder as is shown in the figure 3. 5. Reinstall the back cover as is explained in the section 3 of this document. Slide metallic SIM card holder hinge (market with blue arrow) to the direction of orange arrow.
TRK2XX Initiation Manual 2. Ensure to use Saft LS14500 or compatible 3.6 V Primary lithium-thionyl chloride battery. If any doubt please contact Accent Systems. 3. Use the same batch batteries, do not mixed used batteries with new ones. 4. Insert the batteries in the correct position as is shown in figure 4.
Page 11
TRK2XX Initiation Manual RGB LED window Micro USB connector Figure 5 - TRK230 recharging BATTERIES SAFETY WARNINGS • Caution: Risk of explosion if the battery is replaced by an incorrect type (for TRK210) • Do not disassemble or open, drop (mechanical abuse), crush, bend or deform, puncture, or shred.
TRK2XX Initiation Manual A battery subject to extremely low air pressure (low air pressure at high altitude) that may result in a explosion or the leakage of flammable liquid or gas WARNING: Never attempt to open the battery for any reason. If battery case is cracked or ...
This feature is only present on the firmware version TRK V1.2019-04-9.0 and the following ones. Fore more info contact Accent Systems. 13. Inmolecular Inmolecular by Accent Systems is the name of cloud platform that manages and collect all the information that TRK devices send. Fore more information visit http://www.inmolecular.com 14.
Page 14
TRK2XX Initiation Manual 6. Click Over the device that you want to connect. 7. A connection process starts and finish when appears the following screen 8. Scroll down “Sending types:” label. Here is the starting point of communications configuration.
TRK device. Figure 10 - QR code and Inmolecular platform TRK serial number matching 15. TRK2XX advanced configuration TRK2XX series advanced configuration depends on the firmware version. Please refer to TRK2XX Advanced configuration manual. 16.Accent Systems Support Contact support@accent-systems.com...
TRK2XX Initiation Manual 17.FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCCID: 2ABTTTRK230 FCC statement This equipment has been tested and found to comply with the limits for a Class B...
Page 17
TRK2XX Initiation Manual The device contains FCC IDs: XMR201707BG96 & 2AC7Z-ESPWROOM02 This device has NOT to be used to track people, do NOT attach it on human body. Device duty cycle The device minimum interval between two events of cellular data transmission is 8 minutes, the maximum interval is 1440 minutes, this boundaries can not be overridden by customer because the device’s firmware controls these limits.
TRK2XX Initiation Manual 18.CE-RED statements There are no rest r ictions of use. Frequency bands and maximum transmitted power Frequency LTE-FDD 23dBm±2dB B1/B2/B3/B4/B5/B8/B12/B13/B18 /B19/B20/B26/B28 LTE-TDD B39 23dBm±2dB GSM850/GSM900 33dBm±2dB DCS1800/PCS1900 30dBm±2dB GSM850/GSM900 (8-PSK) 27dBm±3dB DCS1800/PCS1900 (8-PSK) 26dBm±3dB Bluetooth PWR = up to 4 ± 1 dBm WiFi 802.11b +20.5dBm±1dB 802.11g +16.5dBm±1dB...
Page 19
TRK2XX Initiation Manual Accent Systems www.accent-systems.com...