Table of Contents
Advertisement
● Check the New MAC Address
Connection
1. Connect the SYSTEM CONNECTOR terminal of the BD-940 to the SYSTEM CONNECTOR terminal of the R-840
with a system control cable. (Fig. 3)
2. Connect the VIDEO OUT terminal of the BD-940 to the VIDEO IN terminal of the TV with a video pin cable. (Fig. 3)
Operation Procedure
Perform the following steps while watching the TV monitor screen and using the keys on the remote control.
1. With this unit in the standby mode, press the " " (On/Standby) key of this unit to turn on the power.
2. Set this unit to the Communication Setup mode by procedure below.
Press the "SETUP" key => Select the Setting menu => Select the Communication Setup menu
"
"(On/Standby) key
"
" (RIGHT) key
"ENTER" key
"
" (DOWN) key
"SETUP" key
This unit (BD-940)
Video pin cable
System control cable
Fig. 3
This unit
Remote control
TV monitor
R-840
Setup menu
Displays The Title List
On Screen Language
Setting menu
Audio Video Settings
Quick Start
Auto Power Off
HDMI Control
Playback Setting
Communication Setup
Version
USB Memory Management
Software Update
System Reset
BD-940
Settings
Picture
15
Advertisement
Table of Contents
