Information Display - Fujitsu Waterstage WOYG160LJL Installation Manual

►

Information display

Various data can be displayed by pressing the
button.
Depending on the type of unit, configuration and
operating state, some of the info lines listed below may
not appear.
- Possible error messages from the error code list
(see table, page 74).
- Possible service messages from the maintenance
code list.
- Possible special mode messages.
- Various data (see below).
Designation
Floor drying current setpoint.
Current drying day.
Terminated drying days.
State heat pump.
State supplementary source.
State DHW.
State swimming pool.
State heating circuit 1.
State heating circuit 2.
State cooling circuit 1.
Outdoor temperature.
Room temperature 1.
Room setpoint 1.
Flow temperature 1.
Flow temperature setpoint1.
Room temperature 2.
Room setpoint 2.
Flow temperature 2.
Flow temperature setpoint 2.
DHW (domestic hot water) temperature.
Heat pump return temperature.
Setpoint (return) HP.
Heat pump flow temperature.
Setpoint (flow) HP.
Swimming pool temperature.
Swimming pool temperature setpoint.
Minimum remaining stop time for compressor 1.
Minimum remaining running time for compressor 1.
- 66 -
Line
-
-
-
8006
8022
8003
8011
8000
8001
8004
8700
8740
8743
8770
8773
8830
8410
8412
8900
-
-
Waterstage / Installation / 2011 - EN