No Image Is Projected - Epson EMP-S4 Quick Start Manual

No Image is Projected

For Notebooks and Computers with Liquid Crystal Displays
When "Computer" is displayed at the
bottom left of the screen
Change the computers output source. Hold
down the key and press the appropriate
key (the one usually labelled
After changing the setting, wait a few
seconds for projection to start.
Examples
NEC
Panasonic
SOTEC
HP
TOSHIBA
IBM
SONY
DELL
FUJITSU
Use mirroring or display detection.
Macintosh
Depending on the OS, it is possible to
change by pressing the
Computer's "User's Guide"
Depending on the computer, each time the
key for changing the output is pressed, the
state changes as follows.
Computer only Screen only
You can switch the input source
to computer by doing one of the
following.
/ ).
Press
Press
key.
If it still does not project
Both
When "Video" is displayed at
the bottom left of the screen
on the control panel
on the remote control
For Video Equipment
Start playback then press .
23