Installing The Drain Hose - LG J5 Series Owner's Manual

Using the Horizontal Tap
Horizontal tap
Extension tap
Square tap
Connecting Hose to Appliance
Attach the hot water line to the hot water supply
on the back of the washer. Attach the cold water
line to the cold water supply on the back of the
washer.
Cold water
supply
NOTE
•
After completing connection, if water leaks from
the hose, repeat the same steps. Use the most
conventional type of tap for the water supply. In
case the tap is square or too big, remove the guide
plate before inserting the tap into the adaptor.

Installing the Drain Hose

•
•
•
•
Hot water
supply (optional)
•
The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
If the drain hose is too long, do not force it
back into the appliance. This will cause
abnormal noise.
The hose is fixed on the back of the washing
machine. Do not remove holder and disconnect
the hose. It can cause the water leakage while
the washing machine is operating.
~ 100 cm
~ 120 cm
~ 105 cm
max. 100 cm
When installing the drain hose to a sink,
secure it tightly with string.
Securing the drain hose correctly will protect
the floor from damage due to water leakage.
Laundry tub
Hose retainer
max. 100 cm
max. 100 cm
Tie strap
EN
15