Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
SR-M SERIES PRO
*
THESE INSTRUCTIONS ARE FOR THE FOLLOWING LIGHTS:
SR-M SERIES PRO
IMPORTANT
THANK YOU FOR PURCHASING RIGID PRODUCTS FOR YOUR VEHICLE.
Please read through all of these Instructions and tips before proceeding with the installation.
We do our best to provide a simple installation process for all applications however
a professional installation is always recommended.
Always disconnect any power sources connected to your vehicle
before servicing fuses or electrical systems.
Advertisement
Summary of Contents for RIDGID PRO SR-M Series
- Page 1 INSTALLATION INSTRUCTIONS SR-M SERIES PRO THESE INSTRUCTIONS ARE FOR THE FOLLOWING LIGHTS: SR-M SERIES PRO IMPORTANT THANK YOU FOR PURCHASING RIGID PRODUCTS FOR YOUR VEHICLE. Please read through all of these Instructions and tips before proceeding with the installation. We do our best to provide a simple installation process for all applications however a professional installation is always recommended.
- Page 2 SR-M SERIES PRO Assemble your LED light kit by attaching the mount (D) to the housing (A) using the provided bolt(s) (B) and nylon lock nut(s) (C). Tighten until snug. Use the remaining bolt, washers, and nut (E, F, G, H) to mount the completed light assembly.
- Page 3 SWITCH WIRING NOTE: GOLD Spade is the Top of Switch, 3/4” mounting hole required Black Wire = Switch Ground Blue Wire/Red Wire w/ Heat Shrink = Switch Output to Relay Wire = Switch Input Power SWITCH WIRING (SINGLE AND SETS) - P1- Black Wire = Switch Ground - P2 -...
-
Page 4: Warranty Information
Your installation is now complete. Welcome to the Rigid Nation! WARRANTY INFORMATION For warranty information, visit www.rigidindustries.com/about/warranty 779 N Colorado St, Gilbert, AZ 85233 • 855-760-5337 www.rigidindustries.com SR-M and Rigid Industries are registered and/or common law marks owned by JST Performance, LLC, a Delaware limited liability company d/b/a Rigid Industries.