Internal Structure; System Internal Components - Mitsubishi Apricot FT2200 System Manual

3.1.1

Internal Structure

The system internal components are accessible by opening the left
panel door. The system board, memory board, expansion boards (if
any), and the power supply module mainly occupy the housing
interior. On the rear end of the housing are the keyboard, mouse,
video, parallel, and serial ports, and the slot openings for installation of
EISA and PCI expansion boards.
The upper front section accommodates a 3.5-inch and three 5.25-inch
drives while the lower section holds the eight hot-swappable SCSI
drive trays. These devices on the front section are externally
accessible. Right behind the drives is an eight-slot SCSI backplane
board that connects the drives to the SCSI interface.
Figure 3-2 shows the components inside the system housing.
Power Supply
Power Supply
Metal Plate
Expansion Slot
Brackets
Memory Board
System Board
Backplane Board
SCSI Drive Trays
Figure 3-2

System Internal Components

System Configuration
3.5-inch and 5.25-inch
Drive Bays
3-2