Table of Contents
Advertisement
Organization
•
•
•
Organization
This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Related Documentation
Your router or switch and the Cisco IOS software running on it contain extensive features and
functionality, which are documented in the following resources:
•
•
PA-E3 Serial Port Adapter Installation and Configuration
viii
Cisco 7304 PCI Port Adapter Carrier Card in the Cisco 7304 router
Cisco 7401ASR router
VIP in Cisco 7500 series routers and Cisco 7000 series routers with the 7000 Series Route Switch
Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI)
Title
Overview
Preparing for Installation
Removing and Installing
Port Adapters
Configuring the PA-E3
Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
You can access Cisco IOS software configuration and hardware installation and maintenance
Note
documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com,
Catalyst 5000 family switches with RSM/VIP2:
For an online directory to quickly access documents for Cisco Catalyst 5000 series switches,
–
refer to the Cisco Catalyst 5000 Series Switches Install and Upgrade Guides index at the
following URL:
http://www.cisco.com/en/US/products/hw/switches/ps679/prod_installation_guides_list.html
Description
Describes the PA-E3 and its LED displays,
cables, and receptacles.
Describes safety considerations, tools required,
and procedures you should perform before the
actual installation.
Describes the procedures for installing and
removing PA-E3 port adapters in the supported
platforms.
Provides instructions for configuring the PA-E3
on the supported platforms.
or
http://www-europe.cisco.com.
Preface
OL-3502-04
Advertisement
Table of Contents
