Cisco PA-4E1G Series Installation And Configuration Manual page 80

Serial port adapter
Table of Contents

Advertisement

Chapter 4
Configuring the PA-4E1G
Checking the Configuration
20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2
VIP in Cisco 7000 Series and Cisco 7500 Series Routers—Example Output of the show version Command
Following is an example of the show version command from a Cisco 7500 series routers with a PA-4E1G
installed:
Router# show version
Cisco Internetwork Operating System Software
IOS (tm) GS Software (RSP-JV-M), Version 11.1(14)CA [biff 184]
Synced to mainline version: 11.1(13)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Wed 08-Oct-98 00:37 by biff
Image text-base: 0x600108A0, data-base: 0x609DC000
ROM: System Bootstrap, Version 5.3(16645) [biff 571]
ROM: GS Software (RSP-BOOT-M), Version 11.1(618) [biff 191]
Router uptime is 3 hours, 14 minutes
System restarted by reload
System image file is "biff/rsp-jv-mz.g703", booted via tftp from 1.1.1.253
cisco RSP2 (R4600) processor with 32768K bytes of memory.
R4600 processor, Implementation 32, Revision 2.0
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
TN3270 Emulation software (copyright 1994 by TGV Inc).
Chassis Interface.
1 VIP2 controllers (4 Serial).
4 Serial network interfaces.
125K bytes of non-volatile configuration memory.
16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 7.
Configuration register is 0x2
PA-4E1G Serial Port Adapter Installation and Configuration
4-16
OL-3065-05

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa-4e1g-75Pa-4e1g-120

Table of Contents