Kenwood NX-5000 Series Common Function Reference page 32

1
1 FUNCTIONS AND PANEL LAYOUT
FUNCTIONS AND PANEL LAYOUT
1.1 NX-5200/ NX-5300/ NX-5400
Full Key Model
1
2
3
5
6
7
8
9
10
11
12
14
16
17
19
Selector
A
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
Power Switch/ Volume Control
B
The transceiver can be turned ON by rotating the Power
switch. The volume level of the speaker sound can be
adjusted.
Transmit LED/ Busy LED
C
These LEDs light when the transceiver transmits or
receives a signal.
AUX Key
D
The preassigned function will be activated or will be
changed to the active state.
Lever Switch
E
The preassigned function will be activated or will be
changed to the active state.
Side 1 Key
F
The preassigned function will be activated or will be
changed to the active state.
Speaker
G
The received audio and the Alert Tone sound from the
speaker.
Common FUNC (K, F)/Ver 2.20
4
13
15
18
Figure 1-1 NX-5200/ NX-5300/ NX-5400 Front View
Standard Key Model
1
2
3
5
6
7
8
9
10
11
12
14
16
17
20
PTT Switch
H
Pressing the PTT switch allows transmitting.
Built-in Microphone
I
LCD
J
The channel number and the transceiver's status appear
on this display.
Side 2 Key
K
The preassigned function will be activated or will be
changed to the active state.
Side 3 Key
L
The preassigned function will be activated or will be
changed to the active state.
M
[G]/ [H] Key
The preassigned function will be activated or will be
changed to the active state. It is normally used to change
the zone or channel.
N
[Q] (Menu) Key
The preassigned function will be activated or will be
changed to the active state. In this manual, the [Q]
(Menu) key is described as the Menu ([Q]) key.
CONTENTS
4
13
15
18
1
INDEX