2-Port 10G Base-Xfp Interface Module (Ls-Xp2-T2) - NEC QX-S5526P Installation Manual

Installation Guide
QX-S5500 Series Ethernet Switches

1.5.3 2-port 10G BASE-XFP interface module (LS-XP2-T2)

A 2-port 10 GE XFP interface module provides two 10 Gbps XFP optical ports. You can
insert an XFP transceiver into the port to connect it to another XFP port through an optical
fiber. You can select the following XFP transceivers in Table 1-16 as required.
Transceiver
10GBASE-SR-XFP
10GBASE-LR-XFP
10GBASE-ER-XFP
 NOTE:
You must use XFP transceivers of the QX series.

The types of XFP transceivers may update with time. For information about transceivers, contact NEC

technical support or marketing staff.
Figure 1-15 2-port 10G BASE-XFP interface module (LS-XP2-T2)
Port LED
Figure 1-16 2-port 10G BASE-XFP interface module front panel (LS-XP2-T2)
Port LED
Table 1-16 XFP transceivers supported by 10 GE XFP interface module
Central
wavelength
850 nm
1310 nm
1550 nm
Connector Fiber
50/125 μm multi-mode
optical fiber
LC
9/125 μm single-mode
optical fiber
1-15
1 Product overview
Max transmission
distance
300 m
10 km
40 km