Table of Contents
Advertisement
Others
Troubleshooting
Problem
Power does not turn on
The cooling fan motor
is not working
Power turns off
automatically
The power turns on
automatically
Input cannot be
switched
There are no video
images on the monitor
Screen is distorted
There is no audio
sound
Dubbing cannot be
performed
Dubbing cannot be
performed
High-speed dubbing
cannot be performed
for EP mode titles
8
Symptom
The "HELLO" message remains displayed,
and the unit does not start up.
"FAN LOCKED" is displayed on the
display window of this unit.
The "AUTO POWER (OFF)" setting is set
to "2 HOURS" or "6 HOURS".
The temperature of this unit has rose, and
operation has ceased for safety purposes.
The "HDMI-CEC" setting is set to "ON".
i.LINK connection is currently being
established.
Monitor only supports RGB input.
"HDCP ERROR" is displayed.
Video images may be distorted during
reencoding/dubbing when the monitor (TV)
is connected to this unit using an HDMI
cable, or when the screen resolution is set
to "1080p".
Video images may be distorted during
reencoding/dubbing when the monitor (TV)
is connected to this unit using an HDMI
cable, or when the screen resolution is set
to "1080p".
The "HDMI AUDIO OUTPUT" setting is set
to "OFF".
The amplifier does not support
"BITSTREAM" output.
The title to be dubbed is copyright
protected.
A finalized disc has been inserted.
The disc is not formatted.
The SD card is write-protected.
"NEXT" cannot be selected when a title
that cannot be dubbed is chosen.
"NEXT" cannot be selected due to
insufficient disc space.
"NEXT" cannot be selected as a dubbing
title list is not created.
Dubbing cannot be performed and "SOME
TITLES CANNOT BE DUBBED" is
displayed when trying to perform high-
speed dubbing of a EP mode title to a
DVD-VIDEO mode disc.
Action
Press the [RESET] button on the front panel.
If it does not start up, stop using this unit, unplug the
plug from the outlet, and bring it to the dealer or Service
Center.
The cooling fan motor is spoiled. Stop using the unit,
remove the power plug from the outlet, and consult the
dealer or Service Center.
Change the "AUTO POWER (OFF)" setting of "SETUP"
to "OFF".
Place this unit in an area with ventilation if possible,
and wait approximately 30 minutes for it to cool down.
Change the "HDMI-CEC" setting of "CONNECTION" to
"OFF".
Cancel importing, or wait until the connection ends.
Set "HDMI --> DVI COLOR" in the setting menu to
"RGB FIX".
Use a monitor that supports HDCP.
This is not a malfunction. Change the "HDMI OUTPUT
RESOLUTION" to a value other than "1080p" (e.g.,
1080i) if you find it annoying.
This is not a malfunction. Change the "HDMI OUTPUT
RESOLUTION" to a value other than "1080p" (e.g.,
1080i) if you find it annoying.
Change the "HDMI AUDIO OUTPUT" setting of
"CONNECTION" to "ON".
Use an amplifier that supports bitstream output.
Titles that are copyright-protected cannot be dubbed.
Select a title that is not copyright-protected.
Insert a disc that has not been finalized.
Format the disc.
Remove the SD card and remove the write protect lock.
Dubbing may start when you return to recording
mode selection to change the recording mode.
Some titles cannot be dubbed depending on their
recording mode and format.
You can distinguish titles that cannot be dubbed by
selecting the titles one by one.
Dubbing may start when you return to recording
mode selection to change the recording mode.
Dubbing may start after reducing the number of titles
to be dubbed.
Dubbing may start by switching to a dual-layer disc.
Select at least one content for dubbing.
Set "HIGH-SPEED DUBBING" in the settings menu to
"4:3" before recording or importing in the EP mode.
Advertisement
Table of Contents
