Description Of The Interfaces - Overview; Connection Of The Y-Repeater (Block Diagram); G4 Display Interfaces - Bosch Rexroth IndraControl VDP 16.1 Project Planning Manual

DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
7.2.2

Description of the Interfaces - Overview

7.2.3

Connection of the Y-Repeater (Block Diagram)

7.2.4

G4 Display Interfaces

X31, X32, X33 – G4 display interfa‐
Fig.7-15: Interface to the VDP displays
Designation at the
housing
X21
X33
X31
X32
Fig.7-16: Connections Y-repeater
Fig.7-17: Connection of the Y-repeater
Via the 25-pin G4 display interfaces (X31, X32, X33) the Y-repeater is connec‐
ces
ted, on the one hand, to the control cabinet PC (IPC) and, on the other hand,
to the two VDP displays. Connecting cables of different lengths are listed in
chapter 11 "Ordering Information" on page
Connector type (in‐
Connection type
tegrated)
Weidmüller connec‐
Digital 24 V input:
tor terminal, MSTB
> Input bit to select
1.5
the active VDP
3-pin
G4 display interface
D-Sub connector,
> Connection to
control cabinet PC 25-pin
(IPC)
G4 display interface D-Sub female con‐
nector,
> Connection to
VDP 1 25-pin
G4 display interface D-Sub female con‐
nector,
> Connection to
VDP 2 25-pin
61.
Bosch Rexroth AG 51/69
Interfaces
Mating connector or
cable (from outside)
Weidmüller female
connector terminal,
MSTB 1.5,
3-pin
D-Sub female con‐
nector,
25-pin
D-Sub connector,
25-pin
D-Sub connector,
25-pin