Adding More Ingredients; After You Have Finished Using Your Appliance; Working With Special Accessories - Silvercrest SKV 1200 B2 Operating Instructions Manual

7) Turn the rotary switch 3 to the desired setting .
NOTE
► The ideal speed depends on the consistency
of the items being mixed . The more liquid the
contents are, the faster you can mix them .
► For short, powerful pulsed operation, turn
the rotary switch 3 anticlockwise to level P .
Level P does not lock into place so as not
to overload the motor . You should therefore
keep the rotary switch 3 in this position only
for a short time .
CRUSHING ICE
► In order to produce crushed ice, place ice
cubes in the blender t, close it and turn the
rotary switch 3 approx . 7 times to level P
for 5 seconds . You may need to adapt the
above instructions depending on the quantity
and size of the ice cubes .

Adding more ingredients

1) Turn the appliance off using the rotary switch 3 .
2) Remove the blender lid r and add the ingredi-
ents
or
3) Turn the measuring cup e in the blender lid r
clockwise as far as it will go and then take it
out . Add the ingredients gradually through the
opening in the blender lid r .
After you have finished using your
appliance
1) Turn the appliance off using the rotary switch 3
(Position "0") .
2) Turn the blender t clockwise so that the
symbol on the blender t is pointing to the
symbol on the appliance and remove it .
NOTE
► Ideally, you should clean the blender t im-
mediately after use (see the section "Cleaning
and care") . This makes food residues easier
to remove .
■ 8 │ GB │ IE │ NI
3) Place the drive protection cover u back on
the blender drive i so that the
the drive protection cover u is pointing to the
symbol on the appliance . Turn the drive
protection cover u anticlockwise so that the
symbol on the drive protection cover u is
pointing to the

Working with special accessories

NOTE
► The special accessories, such as a meat
grinder attachment, a noodle attachment and
vegetable grater, can be ordered online at
www .kompernass .com .
ATTENTION! PROPERTY DAMAGE!
► The drive unit for special accessories o
should only be used for accessories which
are specifically approved for use with this
appliance by the manufacturer .
1) Turn the appliance off using the rotary switch 3
(Position "0") .
2) Push the cover over the drive unit for special
accessories o upwards and remove it from
the appliance .
3) Attach the special accessory to the appliance
in accordance with its operating instructions .
ATTENTION! PROPERTY DAMAGE!
► Never use special accessories at the same
time as the mixing bowl 6 or blender t!
This will overload the motor!
After you have finished using
your appliance
1) Turn the appliance off using the rotary switch 3
(Position "0") .
2) Disconnect the special accessory from the ap-
pliance as stated in its operating instructions .
3) Clean all components as described in the
section "Cleaning and care" .
4) Place the cover for the drive unit for special
accessories o back in position .
symbol on
symbol on the appliance .
SKV 1200 B2