Advertisement
Quick Links
Step 1
Download the Linksys Apps from
Apple Store or Google Play Store
into your mobile phone
Step 4
Connect the ethernet cable from
your ONT/Modem to the port near
the "Reset" button of your first
Velop (Master Node)
Step 7
Open Linksys Apps and follow
the instruction
INSTALLATION
Step 2
Switch off power to your
ONT/Modem
Step 5
Ensure your Bluetooth is turned
ON at your mobile phone.
Step 8
If the Linksys Apps prompted to
connect to Setup Wi-Fi during the
setup, go to the setting on your
phone and locate the network
name that match the Setup Wi-Fi
printed at the bottom of the
Master Node
GUIDE
Step 3
Unplug and remove your old
router from the ONT/Modem
Step 6
Power up the Velop and wait until
the LED turn solid
PURPLE
Advertisement
Related Manuals for Linksys Velop
Summary of Contents for Linksys Velop
- Page 1 Step 4 Step 5 Step 6 Connect the ethernet cable from Ensure your Bluetooth is turned Power up the Velop and wait until your ONT/Modem to the port near ON at your mobile phone. the LED turn solid PURPLE the “Reset” button of your first...
- Page 2 Carefully take note of your account name and password and the VLAN ID. Note: The setup will allow you to use Velop as internet gateway only. To use the IPTV service, you can configure Velop as a bridge mode and connect the Master Node to the old router.