Connecting A Cellular Phone; Disconnecting A Cellular Phone; Deleting A Registered Phone - Pioneer DEH-P70BT Operation Manual

Hands-free phoning
5 If you want to register two or more cel-
lular phones, repeat steps 1 to 4.
Notes
! Depending on the type of cellular phone, re-
gistration is available only from a cellular
phone. In this case, select Connection open
on step 2 and then register using the cellular
phone.
! If you need to know the Device name and the
BD (Bluetooth Device) address of this unit
(DEH-P70BT), select Connection open on
step 2 and then push Multi-Control left or
right.
! Depending on the type of cellular phone, re-
gistration is available only from this unit.
! Audio adjustment (refer to page 72) can be set
independently for each user .

Connecting a cellular phone

After registered, it is necessary to connect
your cellular phone to this unit. Without con-
necting, hands-free phoning is not available.
! With connection via Bluetooth technology,
HFP (Hands Free Profile) is prioritized than
HSP (Head Set Profile). If connection can-
not be established by HFP, HSP connection
takes place.
1 Use Multi-Control to select Set phone.
Set phone (e.g. Set phone 1) appears in the
display.
2 Push Multi-Control up or down to select
Connect phone.
3 Press Multi-Control to connect a cellular
phone to this unit.
While connecting, Connecting is displayed.
After the connection is completed, Connected
is displayed.
All manuals and user guides at all-guides.com
# If Auto connect is set to on, cellular phone
that has already been registered is connected
automatically. For more details, refer to Setting
the automatic connection on page 49.

Disconnecting a cellular phone

It is possible to disconnect your cellular phone
from this unit.
! This operation is possible when your cellu-
lar phone has already been connected to
this unit.
1 Use Multi-Control to select Set phone.
Set phone (e.g. Set phone 1) appears in the
display.
2 Push Multi-Control up or down to select
Disconnect phone.
3 Press Multi-Control to disconnect a cel-
lular phone from this unit.
After the disconnection is completed,
Disconnected is displayed.

Deleting a registered phone

It is possible to delete a phone that has been
registered.
! This operation is possible when your cellu-
lar phone has already registered and dis-
connected from this unit.
1 Use Multi-Control to select Set phone.
Set phone (e.g. Set phone 1) appears in the
display.
2 Push Multi-Control up or down to select
Delete phone.
Section
08
43
En