Initial Setup; Auto Tuner Setup - JVC AV-27D302 User Manual

All manuals and user guides at all-guides.com
FD mini-IB 1/16/01 3:33 PM

Initial Setup

Auto Tuner Setup

If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please skip
ahead to "Channel Summary" to continue setting up your television.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active
ones and skipping over blank ones or channels with weak signals. This means when you scan (using the
C +/- buttons) you will receive only clear, active channels.
HANNEL
Press the M button
ENU
To AUTO TUNER SETUP
To operate
To choose CABLE or AIR
To move to START
To start Auto Tuner Setup
Programming will take approximately 1 to 2
PROGRAMMING OVER!
• Noise Muting will not work during Auto Tuner Setup.
NOTE:
• Some cable systems experience interference from radio frequencies on cable Channel 95. You
may delete this channel from your scan by removing the "X" next to it on the Channel Summary
screen shown on the next page.
20
Page 20
NOW
PROGRAMMING !
48
minutes.