Setting Dial-Up Connection Parameters - Huawei HG633 Quick Start Manual

3
Setting Dial-Up Connection
Parameters
The HG633 provides an intuitive web management page where you can view or set
the HG633 parameters.
Before you log in to the HG633 web management page, ensure that the computer
used for the login is connected to the HG633 and has been configured to
automatically obtain an IP address or assigned with a static IP address.
1. Open a browser. In the address box, enter 192.168.1.1. Press Enter.
2. Enter the login user name (user by default) and password (HuaweiUser by
default). Click Login.
To protect against unauthorized access, change the user name and password after the
first login. When modify password successfully, this page will jump to the login page,
use the new password to log in.
3. Choose Home tab, click Start Wizard, and select your Internet connection mode.
Refer to the following table to configure the network connection.
Scenario
When you are unsure of the network connection
you subscribed to, you can select this mode that
the device will detect the network connection
automatically.
The account name and password are provided by
your Internet Service Provider (ISP).
No parameter is provided by your ISP. The IP
address is automatically assigned by the ISP.
The user name and password are provided by ISP.
Set up a dial-up connection on one computer
only.
4. Set network access parameters.
If you selected Connect with user account，enter the parameters provided by

your ISP and click Next.
If you selected Connect without user account or Connect with another

modem, click Next.
Connection Type
Connect automatically
Connect with user account
Connect without user account
Connect with another modem
4