Download Print this page

Grizzly H3266 Instruction Sheet

Engine cleaning gun

Advertisement

Quick Links

EYE/EAR INJURY HAZARD!
Wear safety glasses and
hearing protection when
using this tool!
Always disconnect tool from
air to prevent unexpected
operation during service!
DO NOT EXCEED 90 PSI!
Personal
occur.
EXPLOSION HAZARD!
Do not spray flammable
fluids near and open flame
or ignition source.
Always wear a respirator
when using this tool and
use in a well ventilated
area.
Specifications
Air Inlet Size .............................................
Air Consumption ...................................... 12 CFM
Operating Pressure ................................... 90 PSI
Wand Length ..................................................... 9"
Weight .........................................................11 lbs
Operation
1.
Make sure the engine is cool to the touch, and
disconnect the positive battery cable.
2.
Connect the engine cleaning gun (Figure 1) to
an air supply set at 60 PSI. Adjust the trigger
knob until there is no air escaping from the
cleaning gun.
3.
Connect the siphon hose to the cleaning gun
and place the other end into an approved con-
tainer of engine cleaning solution.
All manuals and user guides at all-guides.com
INJURY HAZARD!
injury
could
LUNG HAZARD!
" NPT
1
4
MODEL H3266
ENGINE CLEANING GUN
INSTRUCTION SHEET
Siphon
Knob
Figure 1. Model H3266 (siphon hose not
shown).
4.
To adjust the amount of solution being used,
rotate the siphon knob; to adjust the amount
of air flow; rotate the trigger knob.
5.
Hold the gun so the nozzle is 6–10" from the
surface and squeeze the trigger knob.
6.
When you are done, place the siphon hose
into a clean bucket of water and spray until
the gun sprays clean water.
Air Supply
The engine cleaning gun MUST be regularly lubri-
cated with 3-4 drops of air tool oil directly into the
air fitting before each use. For best results, we
recommend using an in line filter, lubricator, and
regulator, as shown in Figure 2.
Quick
Quick
Connector
Connector
Your
Tool
Quick
Coupler
Air Hose
Figure 2
Installing your tool.
.
Nozzle
Trigger Knob
Lubricator
Regulator
Air
Compressor
Quick
Filter
Coupler

Advertisement

loading

Summary of Contents for Grizzly H3266

  • Page 1 DO NOT EXCEED 90 PSI! Personal injury could occur. Figure 1. Model H3266 (siphon hose not EXPLOSION HAZARD! shown). Do not spray flammable fluids near and open flame To adjust the amount of solution being used, or ignition source.
  • Page 2 If you need help with your new pneumatic tool, call our Tech Support at: (570) 546-9663. COPyrIgHT © MAy, 2008 By grIzzLy INdUSTrIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIZZLY INDUSTRIAL, INC. #JM10774 PrINTed IN CHINA...