Summary of Contents for Napoli Wood Burning Tray for Propane Gas Burner
- Page 1 Wood Burning Tray for Propane Gas Burner MANUAL Napoli LLC PO Box 397 Afton, MN 55001 651-705-6494 info@Bertello.com...
- Page 2 STEP 1 Insert 'Bertello Wood Burning Tray for Propane Gas Burner' through the front of the oven (WITH THE BAKING STONE REMOVED)
- Page 3 STEP 2 Pull tray all the way to the back of the oven...
- Page 4 STEP 3 Insert propane gas burner into back of oven...
- Page 5 STEP 4 Tighten bolts on each side of gas burner...
- Page 6 STEP 5 Insert Baking Stone...
- Page 7 STEP 6 Attach and tighten gas burner regulator to propane tank...
- Page 8 STEP 7 Turn propane valve to open position...
- Page 9 STEP 8 Press in, and turn gas burner knob counter clockwise to 'high'. Hold in for 5 seconds to ignite flame. Leave burner on high to preheat the oven for approximately 20 minutes, Or until you have reached your desired stone temperature.
- Page 10 STEP 9 Turn burner to 'low' once your desired stone temperature has been reached.
- Page 11 STEP 10 Insert wood into the back of the oven. You can use wood kindling, chun,ks pellets, or charcoal.
- Page 12 STEP 11 Close back access hatch door. After wood has ignited and you see a flame rolling across the ceiling of your oven, you are ready to cook!