1.4
System memory
Overview
The motherboard comes with eight DDR4 (Double Data Rate 4) Dual Inline Memory Modules
(DIMM) slots. The figure illustrates the location of the DDR4 DIMM sockets:
Recommended memory configurations
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (8 DIMMs) or overclocking condition.
•
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
•
Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List)
ASUS Pro WS C422-ACE
1-13