Continuous Water Drainage – Using The Auto Drain Pump Option - Honeywell TP30 User Manual

USE & OPERATION (CONTINUED)
DRAINING THE WATER (CONTINUED)
*THIS IS ONLY FOR MODEL TP70P WITH BUILT-IN DRAIN PUMP
3. Continuous Water Drainage – Using the Auto Drain Pump option
The Auto Drain Pump is available if you want to use the continuous drain function, but the drain is
further away, or located above the dehumidifier. The Auto Drain Pump Tube can be attached to the
Direct Drain Outlet located on the back side of the dehumidifier. When the water level in the water
tank reaches a certain level, the drain pump will automatically pump the water out of the tank to
the drain. This allows you to drain water condensation vertically or horizontally, even if the drain is
located above the dehumidifier.
Auto Drain Pump Tube
16.4 ft. (5 m)
NOTE: The Auto Drain Pump Tube and Auto Drain Pump Cap come pre-installed.
3.1 Locate the drain outlet at the back of the unit. Unscrew and remove the Direct Drain Cap.
Insert and screw the Auto Drain Pump Tube into the Direct Drain Outlet.
Auto Drain Pump Cap
EN 15
Direct Drain Cap
Auto Drain Pump Tube