Checking Operation - Miele KM 360 Installation Instructions Manual

Conversion to another type of gas

Checking operation

 Check all gas fittings for leaks.
 Reassemble the cooktop.
 Ignite all burners to check that they
are operating correctly.
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
 Adhere the label supplied with the
jets over the old label stating the type
of gas being used.
24
Refitting the stainless steel
upper section
a
b
 Position the upper section as shown
in the illustration.
 Push it forwards first and then
backwards until the angle bracket 
clicks into place underneath the
lip .
 Then lower the upper section.