Page 1
Although you should use the Users Guide to familiarize yourself with the TV2 before setting it up, you can follow the quick-start instructions below, if you are in a hurry. Your TV2 comes with free software to copy the logged data from your TV2to your computer. www.e2di.com...
Page 2
QUICKSTART Your TV2 can be installed and operating in just a few minutes by following these simple steps. 1. Connect the TV2 to a power supply and touch the screen (LCD). This display will appear. 2. Touch ‘Up’ or 'Down' to select C° or F° and touch ‘Enter’.
Page 3
1. Plug any wired sensor into any socket on the monitor. 2. After a few seconds, the TV2 will recognize the sensor and change the display to the Sensor Setup menu. The hour area of the sample data field will be highlighted.
Page 4
Entitled ‘Calibration Procedures’ on the CD. It can also be downloaded from our website http://www.e2di.com/PDFs/Calibration Procedures.pdf) 11. Touch 'Escape' until you return to the Status Screen. You are done! P O Box 159 • Crestwood, KY 40014 • (502) 243-0042 • (502) 243-0039 fax www.e2di.com info@2di.com •...