Sharp Carousel RK-42S24 Installation Instructions page 3

STEP 3 POWER SUPPLY CORD BOX ASSEMBLY AND REAR DUCT INSTALLATION
1. Roll the power supply cord into the REAR DUCT.
2. Remove the screw
cabinet. Secure the left flange of the REAR
DUCT with the screw
and secure the right flange of the REAR DUCT
with SCREW A. See Sketch 3.
3. Plug the oven power supply cord into the
POWER SUPPLY CORD BOX ASSEMBLY
receptacle. See Sketch 4.
4. Slide the POWER SUPPLY CORD BOX
ASSEMBLY into the REAR DUCT and secure
the POWER SUPPLY CORD BOX ASSEMBLY
and REAR DUCT with two SCREWS A. See
Sketch 5.
POWER SUPPLY
CORD BOX ASSEMBLY
from left top of outer
removed from the oven
Sketch 4
CORD BOX ASSEMBLY
REAR DUCT
POWER SUPPLY
SCREW A
3
SCREW A
Sketch 3
SCREW A
REAR DUCT
Sketch 5