2.
3.
Using SSH for an Internal SMU
These instructions apply if you have an internal SMU. If you have an external
SMU, see
Procedure
1.
2.
3.
4.
Using SSH for an External SMU
These instructions apply if you have an external SMU. If you have an internal
SMU, see
Procedure
1.
82
• Flow control: No flow control
Note: To increase readability of text when connected, set your
terminal emulator to display 132 columns.
Log in as 'root.'
Connect to localhost using the SSC (server control) utility to run the Bali
commands by entering the command:
ssc localhost
Using SSH for an External SMU on page
Use SSH to log in to the internal SMU as 'manager.' Enter the following
command:
ssh manager@[IP Address]
where [IP Address] is the IP address of the NAS server administrative
service EVS.
Enter the password for the 'manager' user account.
By default, the password for the manager account is "nasadmin", but this
password might have been changed.
This logs you into the Bali console.
Access the Linux prompt by exiting the Bali console. Enter the following
command:
exit
or press the Ctrl+D keys.
Log in as the 'root' user. Enter the following command:
su -; [password]
where [password] is the password for the root user account.
Using SSH for an Internal SMU on page
SSH into the external SMU as manager. Enter the following command:
ssh manager@[IP Address]
where [IP Address] is the IP address of the NAS server/node.
Hard disk replacement
Hitachi NAS Platform 3080 and 3090 G1 Hardware Reference
82.
82.