Keyframe Effect Timeline Status Display – 610
9-10
Chapter 9 Status Displays
Viewing the whole effect on the timeline – F2 (VIEW
ALL)
With F1 (EXPAND) on, press F2 (VIEW ALL).
This adjusts the time scale so that the whole effect appears on the
timeline.
Setting a pause position – F3 (PAUSE)
This determines the position at which the effect stops after
execution.
Note
The pause setting is only effective when you execute the effect
using the RUN button on the control panel or by a GPI trigger.
Use the following procedure.
1
Select the channel or channels to which the setting is to apply.
2
Stop the effect at the desired pause position.
3
Press F3 (PAUSE).
This sets the pause.
Clearing the pause setting
Stop the effect at the currently set pause position, and press F3
(PAUSE).
This clears the pause setting.