GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 177

Parameter (in bold)
Sub-parameter (Index)
END_POSITION (2)
SET_POINT_RATE (3)
SAMPLING_TIME (4)
DIRECTION (5)
OPTION (6)
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
60 Any
5 Any
10 Any
0 Any
0 Any
Description
Applicable to: All
Start position for the test. May be above or below End
position.
Range is -5 to full open +5.
Applicable to open loop signature: Start and End Positions
must be more than 20% different.
Applicable to: Ramp test and Signatures.
0.5-100.1 %/s.
Applicable to: Step test.
2 to 60 s.
Applicable to Diagnostic signature, Ramp test:
0. Both ways (from Start position to End position and
back).
1. One way (from Start position to End position).
Applicable to Diagnostic signature:
0. Open loop.
1. Closed loop.
Masoneilan SVI FF Instruction Manual
| 177
=