4. Remove the battery.
5. Remove the speaker.
6. Remove the
memory
module.
7. Remove the
DC-in
.
8. Remove the
WLAN
card.
9. Remove the
system
board.
NOTE:
System board can be removed with heatsink assembly attached.
10. Remove the
coin cell
battery.
11. Remove the keyboard.
Steps
1. Remove the two (M2x3) screws that secure the power button with fingerprint reader on the palmrest [1].
2. Lift the power button with fingerprint reader board off the palmrest [2].
Installing the power button with fingerprint reader
Steps
1. Place the power button with fingerprint reader on the palmrest [1].
2. Replace the two (M2x3) screws that secure the power button with fingerprint reader on the palmrest [2].
80
Disassembly and reassembly