Honda Wave 110 Alpha 2018 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Scooter
  5. Wave 110 Alpha 2018
  6. Owner's manual

Honda Wave 110 Alpha 2018 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Honda Wave 110 Alpha 2018

Summary of Contents for Honda Wave 110 Alpha 2018

  • Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 3 Congratulations on your purchase of a new The following code in this manual ● Honda motorcycle. Your selection of a indicates the country. Honda makes you part of a worldwide family of satisfied customers who appreciate Country Code Honda's reputation for building quality into Code Country every product.
  • Page 4 A Few Words About Safety Your safety, and the safety of others, is very DANGER important. Operating this motorcycle safely is You WILL be KILLED or SERIOUSLY an important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety...

  • Page 5: Table Of Contents

    Contents Motorcycle Safety P. 2 Operation Guide P. 12 Maintenance P. 31 Troubleshooting P. 71 Information P. 84 Specifications P. 96 Index P. 99...

  • Page 6: Motorcycle Safety

    Motorcycle Safety This section contains important information for safe riding of your motorcycle. Please read this section carefully. Safety Guidelines ..........P. 3 Safety Precautions..........P. 6 Riding Precautions ..........P. 7 Accessories & Modifications......P. 10 Loading ..............P. 11...

  • Page 7: Safety Guidelines

    Safety Guidelines Safety Guidelines that you and your passenger are both wearing an approved motorcycle helmet and protective Follow these guidelines to enhance your safety: apparel. Instruct your passenger on holding Perform all routine and regular inspections onto the grab rail or your waist, leaning with ●...
  • Page 8 Safety Guidelines Make Yourself Easy to See Keep Your Honda in Safe Condition Make yourself more visible, especially at night, It's important to keep your motorcycle properly by wearing bright reflective clothing, positioning maintained and in safe riding condition. yourself so other drivers can see you, signaling...
  • Page 9 Safety Guidelines If you decide to continue riding, first turn the Never run your motorcycle inside a garage or ignition switch to the (Off) position, and other enclosure. evaluate the condition of your motorcycle. WARNING Inspect for fluid leaks, check the tightness of Running the engine of your motorcycle critical nuts and bolts, and check the handlebar, control levers, brakes, and wheels.

  • Page 10: Safety Precautions

    Safety Precautions Safety Precautions Face shield with unobstructed field of vision ● or other approved eye protection Ride cautiously and keep your hands on the ● WARNING handlebar and feet on the footpegs. Keep passenger's hands onto the grab rail Not wearing a helmet increases the ●...

  • Page 11: Riding Precautions

    Riding Precautions Riding Precautions Exercise caution on low traction surfaces. ● The tyres slip more easily on such surfaces and braking distances are Running-in Period longer. During the first 500 km (300 miles) of running, Avoid continuous braking. ● follow these guidelines to ensure your Repeated braking, such as when motorcycle's future reliability and performance.
  • Page 12 Riding Precautions Use of an anti-theft device is also Wet or Rainy Conditions recommended. Road surfaces are slippery when wet, and wet brakes further reduce braking efficiency. Parking with the Side Stand or Centre Exercise extra caution when braking in wet Stand conditions.
  • Page 13 Riding Precautions Using the centre stand Turn the handlebar fully to the left. To lower the centre stand, stand on the left Turning the handlebar to the right side of the motorcycle. reduces stability and may cause the Hold the left handle grip and the left grab motorcycle to fall.

  • Page 14: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed for your motorcycle by Honda or make Follow all instructions in this owner's modifications to your motorcycle from its manual regarding accessories and original design.

  • Page 15: Loading

    Loading Loading WARNING Overloading or improper loading can Carrying extra weight affects your ● cause a crash and you can be seriously motorcycle's handling, braking and stability. hurt or killed. Always ride at a safe speed for the load you are carrying.

  • Page 16: Operation Guide

    Basic Operation Flow Pre-ride Inspection (P.36 Acceleration Carefully inspect your motorcycle to make sure that it is safe to ride. Apply throttle gradually. Obey the speed limit. Shift Change (P.25 Starting the Engine (P.22 Start and warm the engine. Avoid revving the engine. Starting the Motorcycle How to use basic features.
  • Page 17 Parking (P.8 Braking Close the throttle and apply the Park on a firm level surface. front and rear brakes together. Use the stand, and lock the The brakelight will indicate that steering. you have applied the brakes. Stopping If pulling off the road, signal early enough to show traffic that you are pulling over, and pull over smoothly.
  • Page 18 Parts Location Battery (P.48 Fuse holder (P.82 Helmet holder (P.29 Rear carrier Throttle grip (P.68 (P.29 Brakelight switch (P.62 Spark plug (P.52 Rear brake pedal (P.57 Engine oil drain bolt (P.55 Kickstarter Engine oil fill cap/dipstick (P.22 (P.54...
  • Page 19 Helmet holder (P.29 Headlight (P.70 Document bag (P.30 Centre compartment (P.30 Tool kit (P.30 Seat (P.29 Fuel valve Fuel fill cap (P.27 (P.21 Seat lock (P.29 Drive chain (P.64 Side stand (P.63 Crankcase breather Centre stand (P.8 Shift lever (P.69 (P.25...
  • Page 20 Instruments Speedometer Gear range Shows proper speed range for each gear. Fuel gauge Needle in the red mark, remaining fuel approximately: 1.07 L (0.283 US gal, 0.235 Imp gal) Odometer Total distance ridden.
  • Page 21 Indicators If one of these indicators does not come on when it should, have your dealer check for problems. High beam indicator Left turn signal indicator Right turn signal indicator Gear position indicators Indicate 1st to 4th gear position. Neutral indicator Comes on when the transmission is in Neutral.
  • Page 22 Switches Start button Horn button Turn signal switch Pressing the switch turns the turn signal off. Headlight dimmer switch • : High beam • : Low beam...
  • Page 23 Ignition switch (On) Turns electrical system Switches the electrical system on/off, on for starting/riding. locks the steering. Key can be removed when in the (Off) (Off) or LOCK position. Turns engine off. LOCK Locks steering. Continued...
  • Page 24 Switches (Continued) Steering Lock Locking Turn the handlebar all the way to the left or Lock the steering when parking to help right. prevent theft. Push the key down, and turn the ignition A U-shaped wheel lock or similar device is switch to the LOCK position.
  • Page 25 Fuel Valve The two-way fuel valve is used to control the flow of fuel from the fuel tank to the carburetor. ON: normal position for riding. OFF: for parking, storing, or transportation.
  • Page 26 Starting the Engine Start your engine using the following procedure, regardless of whether the engine is cold or warm. NOTICE • If the engine does not start within 5 seconds, turn the ignition switch to the (Off) position and wait 10 seconds before trying to start the engine again to recover battery voltage.
  • Page 27 Make sure the fuel valve is in the ON Warm up the engine by opening and position. closing the throttle slightly. Turn the ignition switch to the (On) Continue warming up the engine until it runs position. smoothly and responds to the throttle, when Shift the transmission to Neutral ( the choke lever is at fully off.
  • Page 28 Starting the Engine (Continued) If the engine does not start: Turn the ignition switch to the (Off) position. Push the choke lever down all the way to fully off. Open the throttle fully. Crank the engine several times with the kickstarter.
  • Page 29 Shifting Gears Your motorcycle transmission has four forward gears. The gearshift operation differs when stopping and when moving. When stopping, change can be made from 4th to neutral directly with the 4-step rotary system. Stopping When moving, the forward 4-step return system is used.
  • Page 30 Shifting Gears (Continued) Proper shifting can prevent damaging the Downshifting engine and transmission. Downshifting at speeds higher than those in the table below may overrev the engine and Upshifting can cause damage to the engine and The upper limit speed of each gear is shown transmission.
  • Page 31 Refuelling Fuel type: Unleaded petrol only Lower edge of Fuel octane number: Your motorcycle is Fuel fill cap filler neck designed to use Research Octane Number (RON) 91 or higher. Tank capacity: 3.7 L (0.98 US gal, 0.81 Imp gal) Arrow marks Refuelling and Fuel Guidelines (P.9...
  • Page 32 Refuelling (Continued) Closing the Fuel Fill Cap Install and tighten the fuel fill cap firmly by turning it clockwise. Make sure that the arrow marks on the fuel fill cap and fuel tank is aligned. Close the seat. WARNING Petrol is highly flammable and explosive.
  • Page 33 Storage Equipment Rear Carrier Helmet holders Never exceed the maximum weight limit. Maximum Weight: 3.0 kg (6.6 lb) Helmet Holders The helmet holders are located under the seat. Ignition key Use the helmet holders only when parked. WARNING Riding with a helmet attached to the holder can interfere with your ability to Seat lock Rear carrier...
  • Page 34 Storage Equipment (Continued) Centre Compartment Document Bag Never exceed the maximum weight limit. The document bag is in the document Maximum Weight: 5.0 kg (11.0 lb) compartment in the reverse side of the seat. Do not store any items that are flammable Document bag or susceptible to heat damage.

  • Page 35: Maintenance

    Maintenance Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. Importance of Maintenance ......P. 32 Other Adjustments..........P. 70 Maintenance Schedule........P. 33 Adjusting the Headlight Aim ......P. 70 Maintenance Fundamentals ......

  • Page 36: Importance Of Maintenance

    Importance of Maintenance Importance of Maintenance Maintenance Safety Keeping your motorcycle well-maintained is Always read the maintenance instructions absolutely essential to your safety and to before you begin each task, and make sure that protect your investment, obtain maximum you have the tools, parts, and skills required. performance, avoid breakdowns, and reduce air We cannot warn you of every conceivable pollution.

  • Page 37: Maintenance Schedule

    Maintenance work should be performed in accordance with Honda's standards and Honda recommends that your dealer should specifications by properly trained and road test your motorcycle after each periodic equipped technicians. Your dealer meets all maintenance is carried out.
  • Page 38 Intermediate. We recommend service by your dealer, unless Inspect (clean, adjust, lubricate, or replace, if necessary) you have the necessary tools and are mechanically skilled. Replace Procedures are provided in an official Honda Shop Manual. Clean Technical. In the interest of safety, have your motorcycle Lubricate...
  • Page 39 Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 36 × 1,000 mi Drive Chain Every 500 km (300 mi): Battery Brake Shoes Wear Brake System Brakelight Switch Headlight Aim Lights/Horn – Clutch System –...

  • Page 40: Maintenance Fundamentals

    Maintenance Fundamentals Brakes - Check operation; Pre-ride Inspection ● Front and Rear: check shoes wear and To ensure safety, it is your responsibility to freeplay, adjust if necessary. P. 61, P. 57, perform a pre-ride inspection and make sure P. 57 that any problem you find is corrected.
  • Page 41 Maintenance Fundamentals Replacing Parts Battery Always use Honda Genuine Parts or their If the motorcycle is operated with insufficient equivalents to ensure reliability and safety. battery electrolyte, sulfation and battery plate damage will occur. If rapid loss of electrolyte is experienced, or if...
  • Page 42 Maintenance Fundamentals What to do in an emergency WARNING If any of the following occur, immediately see The battery contains sulfuric acid your doctor. (electrolyte) which is highly corrosive Electrolyte splashes into your eyes: ● and poisonous. Wash your eyes repeatedly with cool water for at least 15 minutes.
  • Page 43 Maintenance Fundamentals Checking the Battery Electrolyte NOTICE Park your motorcycle on its centre stand on • Battery fluid is highly corrosive and can a firm, level surface. damage metal or painted surface. Use care Remove the battery. P. 48 when adding distilled water. Check the electrolyte level must be •...
  • Page 44 P. 82 same type. Inspecting and Replacing Fuses NOTICE Installing non-Honda electrical accessories can Turn the ignition switch to the (Off) position overload the electrical system, discharging the to remove and inspect fuses. If a fuse is blown, battery and possibly damaging the system.
  • Page 45 P. 97 higher oils, excluding oils marked as “Energy Conserving” or “Resource Conserving” on the If you use non-Honda engine oil, check the circular API service symbol. label to make sure that the oil satisfies all of the following standards:...
  • Page 46 Maintenance Fundamentals Drive Chain NOTICE Use of a new chain with worn sprockets will cause The drive chain must be inspected and rapid chain wear. lubricated regularly. Inspect the chain more frequently if you often ride on bad roads, ride at Cleaning and Lubricating high speed, or ride with repeated fast After inspecting the slack, clean the chain and...
  • Page 47 Maintenance Fundamentals Crankcase Breather Service more frequently when riding in rain, at full throttle, or after the motorcycle is washed or overturned. Service if the deposit level can be seen in the transparent section of the drain tube. If the drain tube overflows, the air filter may Never use petrol or low flash point solvents for become contaminated with engine oil causing cleaning the drive chain.
  • Page 48 Maintenance Fundamentals Inspecting for Abnormal Wear Tyres (Inspecting/Replacing) Checking the Air Pressure Inspect the tyres for signs of abnormal wear Visually inspect your tyres and use an air pressure gauge to measure the air pressure at on the contact surface. least once a month or any time you think the tyres look low.
  • Page 49 Maintenance Fundamentals Inspecting Tread Depth WARNING Inspect the tread wear indicators. If they Riding on tyres that are excessively become visible, replace the tyres immediately. worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
  • Page 50 Maintenance Fundamentals Have your tyres replaced by your dealer. Air Cleaner For recommended tyres and air pressure, see This motorcycle is equipped with a viscous type “Specifications.” P. 97 air cleaner element. Follow these guidelines whenever you replace Air blow cleaning or any other cleaning can tyres.

  • Page 51: Tool

    Tool The tool kit is stored in the centre compartment. P. 30 You can perform some roadside repairs, minor adjustments and parts replacement with the provided tools. Spark plug wrench ● Standard/Phillips screwdriver ● Screwdriver handle ●...

  • Page 52: Removing & Installing Body Components

    Removing & Installing Body Components Battery Positive terminal Negative terminal Battery cover Tool kit Screw Battery Battery breather tube...
  • Page 53 Removing & Installing Body Components Battery Removal Installation Make sure the ignition switch is in the Install the parts in the reverse order of (Off) position. removal. Always connect the positive + Open the seat. P. 29 terminal first. Make sure that bolts and nuts Remove the battery cover by removing are tight.

  • Page 54: Headlight Case

    Removing & Installing Body Components Headlight Case Headlight Case Removal Pull up the rubber dust covers. Rearview mirrors Loosen the lock nuts by turning clockwise. Loosen the rearview mirrors and remove Rubber dust covers them by turning them clockwise until they will no longer turn.
  • Page 55 Removing & Installing Body Components Headlight Case Installation Screw A Headlight case Collar Install the parts in the reverse order of Screw B removal. To install the rearview mirrors. Install the mirror adapters. Install the rearview mirrors by turning Connector counterclockwise until they will no longer turn.

  • Page 56: Spark Plug

    Spark Plug Checking Spark Plug Spark plug wrench For the recommended spark plug, see Spark plug “Specifications.” P. 97 Standard/Phillips screwdriver Use only the recommended type of spark plug in the recommended heat range. NOTICE Using a spark plug with an improper heat range can cause engine damage.
  • Page 57 Spark Plug Checking Spark Plug Check the spark plug gap using a wire- Tighten the spark plug: type feeler gauge. If the old plug is good: ● If adjustment is necessary, bend the 1/6 turn after it seats side electrode carefully. If installing a new plug, tighten it twice ●...

  • Page 58: Engine Oil

    Engine Oil Checking the Engine Oil Upper level If the engine is cold, idle the engine for 3 to 5 minutes. Turn the ignition switch to the (Off) position and wait for 2 to 3 minutes. Place your motorcycle on its centre stand on a firm, level surface.
  • Page 59 Engine Oil Adding Engine Oil Adding Engine Oil NOTICE Overfilling with oil or operating with insufficient oil can cause damage to your engine. Do not mix If the engine oil is below or near the lower different brands and grades of oil. They may level mark, add the recommended engine oil.
  • Page 60 Engine Oil Changing Engine Oil Place your motorcycle on its centre stand Install a new sealing washer onto the on a firm, level surface. drain bolt. Tighten the drain bolt. Place a drain pan under the drain bolt. Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft) Remove the oil fill cap/dipstick, drain bolt and sealing washer to drain the oil.

  • Page 61: Brakes

    Brakes Inspecting the Rear Brake Inspecting the Front Brake Pedal Freeplay Lever Freeplay Place your motorcycle on its centre stand Place your motorcycle on its centre stand on a firm, level surface. on a firm, level surface. Measure the distance the rear brake Measure the distance the front brake pedal moves before the brake takes hold.
  • Page 62 Brakes Adjusting the Rear Brake Pedal Freeplay Adjusting the Rear Brake Pedal Check the brake cable for kinks or signs of wear. If necessary have it replaced by your Freeplay dealer. Lubricate the brake cable with a Make sure the cut-out on the adjusting nut is commercially available cable lubricant to seated on the brake arm pin when adjusting prevent premature wear and corrosion.
  • Page 63 Brakes Adjusting the Rear Brake Pedal Freeplay Adjust by turning the rear brake adjusting Push the brake arm to confirm that there nut a half-turn at a time. is a gap between the rear brake adjusting nut and brake arm pin. Brake arm Push Brake arm pin...
  • Page 64 Brakes Adjusting the Front Brake Lever Freeplay Adjusting the Front Brake Lever Freeplay Adjust the freeplay of the brake lever with the front wheel pointed straight ahead. Decrease Make sure the cut-out on the adjusting nut is Freeplay Brake arm seated on the brake arm pin when adjusting the freeplay.
  • Page 65 Brakes Inspecting the Brake Shoe Wear Inspecting the Brake Shoe Push the brake arm to confirm that there is a gap between the front brake Wear adjusting nut and brake arm pin. The front and rear brake are equipped with a Brake arm brake wear indicator.
  • Page 66 See your dealer for this service. When the brake service is necessary, see your Adjusting nut dealer. Use only Honda Genuine Parts or its equivalent.

  • Page 67: Side Stand

    Side Stand Checking the Side Stand Side stand spring Check that the side stand operates smoothly. If the side stand is stiff or squeaky, clean the pivot area and lubricate the pivot bolt with clean grease. Check the spring for damage or loss of tension.

  • Page 68: Drive Chain

    Drive Chain Inspecting the Drive Chain Slack Check the drive chain slack at several points along the chain. If the slack is not constant at all points, some links may be kinked and binding. Have the chain inspected by your dealer. Shift the transmission to Neutral.
  • Page 69 Drive Chain Adjusting the Drive Chain Slack Adjusting the Drive Chain Slack Lock nut Drive chain adjuster Adjusting the chain requires special tools. Have the drive chain slack adjusted by your dealer. Scale Shift the transmission to Neutral. Stop the graduations engine.
  • Page 70 Drive Chain Adjusting the Drive Chain Slack Turn both adjusting nuts an equal Tighten the rear axle nut. number of turns until the correct drive Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft) chain slack is obtained. Turn the adjusting nuts clockwise to tighten the chain. Turn Hold the adjusting nuts and tighten the the adjusting nuts counterclockwise and lock nuts.
  • Page 71 Drive Chain Adjusting the Drive Chain Slack Checking the Drive Chain Wear If the drive chain slack is excessive when the rear axle is moved to the furthest limit of adjustment, the drive chain is worn and must be replaced. Chain: DID420AD2 KMC420JB...

  • Page 72: Throttle

    Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open in all steering positions and throttle freeplay is correct. If the throttle does not move smoothly, close automatically, or if the cable is damaged, have the motorcycle inspected by your dealer.

  • Page 73: Crankcase Breather

    Crankcase Breather Cleaning the Crankcase Breather Place a suitable container under the crankcase breather tube. Remove the crankcase breather tube and drain deposits. Reinstall the crankcase breather tube. Crankcase breather tube...

  • Page 74: Other Adjustments

    Other Adjustments Adjusting the Headlight Aim You can adjust vertical aim of the headlight for proper alignment. Loosen the adjusting bolt and move the headlight up or down as necessary. Tighten the adjusting bolt after adjustment. Obey local laws and regulations. Headlight Adjusting bolt Down...

  • Page 75: Troubleshooting

    Troubleshooting Engine Will Not Start........P. 72 Tyre Puncture ............. P. 73 Electrical Trouble ..........P. 78 Battery Goes Dead ..........P. 78 Burned-out Light Bulb........P. 78 Blown Fuse ............P. 82...

  • Page 76: Engine Will Not Start

    Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ● ● sequence. P. 22 sequence.

  • Page 77: Tyre Puncture

    Tyre Puncture Repairing a puncture or removing a wheel WARNING requires special tools and technical expertise. Riding your motorcycle with a We recommend you have this type of service temporary tyre or tube repair can be performed by your dealer. risky.
  • Page 78 Tyre Puncture Removing Wheels Front Wheel Front axle nut Brake arm Speedometer Removal cable Place your motorcycle on its centre stand on a firm, level surface. Raise the front wheel off the ground by Front brake adjusting placing a support block under the engine. Remove the speedometer cable by pushing the tab.
  • Page 79 Tyre Puncture Removing Wheels Installation Tighten the front axle nut. Install the side collar into the right side Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft) wheel hub. Position the wheel between the fork legs Install the speedometer cable securely. and insert the front axle shaft from the Install the front brake cable and front right side, through the right fork leg and brake adjusting nut.
  • Page 80 Tyre Puncture Removing Wheels Rear Wheel Drive chain adjusting nut Removal Drive chain adjuster Drive chain Support your motorcycle securely and Rear axle nut lock nut raise the rear wheel off the ground using Brake the centre stand or a hoist. Remove the rear brake adjusting nut.
  • Page 81 Tyre Puncture Removing Wheels Remove the rear axle shaft, drive chain Adjust the rear brake pedal freeplay. adjusters, side collars and rear wheel from P. 58 the swingarm. Tighten the rear axle nut. Drive chain Torque: 59 N·m (6.0 kgf·m, 44 lbf·ft) Drive chain adjusting nut lock nut...

  • Page 82: Electrical Trouble

    Electrical Trouble Battery Goes Dead Burned-out Light Bulb Charge the battery using a motorcycle Follow the procedure below to replace a battery charger. burned-out light bulb. Remove the battery from the motorcycle Turn the ignition switch to the (Off) or before charging.
  • Page 83 Electrical Trouble Burned-out Light Bulb Headlight Bulb Remove the headlight case. P. 50 Remove the dust cover. Socket Turn the socket counterclockwise and pull it out. Slightly press the bulb in and turn it Bulb counterclockwise. Install a new bulb and parts in the reverse order of removal.
  • Page 84 Electrical Trouble Burned-out Light Bulb Position Light Bulb Brakelight/Taillight Bulb Bulb Socket Bulb Brakelight/taillight lens Screws Remove the headlight case. P. 50 Remove the brakelight/taillight lens by Pull out the socket and remove it. removing the screws. Pull out the bulb without turning it. Slightly press the bulb in and turn it Install a new bulb and parts in the reverse counterclockwise.
  • Page 85 Electrical Trouble Burned-out Light Bulb Front Turn Signal Bulb Rear Turn Signal Bulb Screw Bulb Bulb Rear turn signal lens Front turn Screws signal lens Remove the rear turn signal lens by Remove the front turn signal lens by removing the screw. removing the screws.

  • Page 86: Blown Fuse

    Electrical Trouble Blown Fuse Blown Fuse Spare fuse Fuse holder Before handling fuses, see “Inspecting and Replacing Fuses.” P. 40 Fuse holders Clips Open the fuse holder and lift out the blown fuse with the clips. Slide the blown fuse out of the clips. Open the seat.
  • Page 87 Electrical Trouble Blown Fuse Do not pry the clips open to get a fuse out; Fuse holder you could bend them and cause poor contact with the new fuse. A loose fuse could cause damage to the electrical system and even start a fire.

  • Page 88: Information

    Information Keys............... P. 85 Instruments, Controls, & Other Features..P. 86 Caring for Your Motorcycle ......P. 87 Storing Your Motorcycle ......... P. 90 Transporting Your Motorcycle....... P. 91 You & the Environment........P. 92 Serial Numbers........... P. 93 Fuels Containing Alcohol......... P. 94 Catalytic Converter ...........

  • Page 89: Keys

    Keys Keys Ignition Key Be sure to record the key number provided with the key number plate and record it in this manual. Store the spare key in a safe location. To make a duplicate, take the spare key or the key number to your dealer.

  • Page 90: Instruments, Controls, & Other Features

    Instruments, Controls, & Other Features Instruments, Controls, & Document Bag Other Features The owner’s manual, registration, and insurance information can be stored in the plastic Ignition Switch document bag located reverse side of the seat. Leaving the ignition switch in the (On) position with the engine stopped will drain the battery.

  • Page 91: Caring For Your Motorcycle

    Frequent cleaning and polishing is important to Thoroughly rinse your motorcycle with ensure the life of your Honda. A clean plenty of clean water and dry with a soft, motorcycle makes it easier to spot potential clean cloth.
  • Page 92 Caring for Your Motorcycle Do not direct water at the air cleaner: Washing Precautions ● Water in the air cleaner can prevent the Follow these guidelines when washing: engine from starting. Do not use high-pressure washers: ● Do not direct water near the headlight: High-pressure water cleaners can ●...
  • Page 93 Caring for Your Motorcycle Aluminium Components Exhaust Pipe and Muffler Aluminium will corrode from contact with dirt, When the exhaust pipe and muffler are painted, mud, or road salt. Clean aluminium parts do not use a commercially available abrasive regularly and follow these guidelines to avoid kitchen cleaning compound.

  • Page 94: Storing Your Motorcycle

    Storing Your Motorcycle Storing Your Motorcycle After removing your motorcycle from storage, inspect all maintenance items required by the If you store your motorcycle outdoors, you Maintenance Schedule. should consider using a full-body motorcycle cover. If you won't be riding for an extended period, follow these guidelines: Wash your motorcycle and wax all painted ●...

  • Page 95: Transporting Your Motorcycle

    Transporting Your Motorcycle Transporting Your Motorcycle If your motorcycle needs to be transported, it should be carried on a motorcycle trailer or a flatbed truck or trailer that has a loading ramp or lifting platform, and motorcycle tie-down straps. Never try to tow your motorcycle with a wheel or wheels on the ground.

  • Page 96: You & The Environment

    You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a motorcycle can be containers and take them to a recycling centre. enjoyable, but you must do your part to protect Call your local or state office of public works or the environment.

  • Page 97: Serial Numbers

    Serial Numbers Serial Numbers Frame number The frame and engine serial numbers uniquely identify your motorcycle and are required in order to register your motorcycle. They may also be required when ordering replacement parts. To check the frame number, open the seat. P.

  • Page 98: Fuels Containing Alcohol

    Fuels Containing Alcohol Fuels Containing Alcohol The use of petrol containing more than 10% ethanol may: Some conventional fuels blended with alcohol Damage the painting of the fuel tank. ● are available in some locales to help reduce Damage the rubber tubes of the fuel line. ●...

  • Page 99: Catalytic Converter

    A defective catalytic converter contributes to air pollution and can impair your engine's performance. A replacement unit must be an original Honda part or equivalent.

  • Page 100: Specifications

    Specifications Main Components ■ Displacement 109 cm (6.6 cu-in) Overall length 1,897 mm (74.7 in) Bore x stroke 50.000 x 55.600 mm (1.9685 x 2.1890 in) Overall width 706 mm (27.8 in) Compression ratio 9.0 : 1 Overall height 1,092 mm (43.0 in) Unleaded petrol Fuel Wheelbase...
  • Page 101 (standard) CPR6EA-9S Spark plug gap 0.80 - 0.90 mm (0.031 - 0.035 in) Idle speed 1,400 ± 100 rpm Honda 4-stroke motorcycle oil API Service Classification SG or higher, excluding oils Recommended marked as “Energy Conserving” or “Resource engine oil Conserving,”...
  • Page 102 Specifications Bulbs Torque Specifications ■ ■ Headlight 12 V-35/35 W Engine oil drain bolt 24 N m (2.4 kgf m, 18 lbf ft) Brakelight/Taillight 12 V-21/5 W Rear wheel axle nut 59 N m (6.0 kgf m, 44 lbf ft) Front turn signal light 12 V-21 W ×...

  • Page 103: Index

    Index Tool kit ............30, 47 Accessories ............10 Crankcase Breather ......... 69 Air Cleaner............46 Crash ..............4 Battery............37, 48 Document Bag ........... 30, 86 Brakelight Switch..........62 Drive Chain..........42, 64 Brakes Freeplay..............57 Shoe Wear ............61 Electrical Trouble ..........
  • Page 104 Fuel Indicators ............17 Gauge ..............16 Instruments ............16 Recommended ..........27, 96 Instruments, Controls, ＆Other Features ... 86 Remaining............16 Tank Capacity ............. 27 Valve..............21 Keys..............85 Fuels Containing Alcohol....... 94 Kickstarter............22 Fuses ............. 40, 82 Left Turn Signal Indicator ......
  • Page 105 Odometer ............ 16, 86 Safety Guidelines ..........3 Safety Precautions ..........6 Engine ............41, 54 Serial Numbers..........93 Shifting Gears ........... 25 Side Stand............63 Parking ..............8 Spark Plug ............52 Parts Location........... 14 Specifications............ 96 Petrol ............27, 94 Speedometer ............
  • Page 106 Turn Signal Switch........... 18 Tyres Air Pressure........... 44, 97 Puncture............... 73 Replacing............44, 73 Washing ............. 87 Weight Limit ..........11, 96 Wheels Front Removal ............ 74 Rear Removal............76...

This manual is also suitable for:

Tmx 125a 2018

Table of Contents