Connections For An A/B Roll Editing System - Sony DVCAM DSR-1500 Operating Instructions Manual

Connections for an A/B Roll Editing System

The following is an example configuration of A/B roll
editing system using the DSR-1500/1500P.
In this configuration, two DSR-1500/1500P units are used,
one as the recorder and the other as player 1, and an analog
Betacam UVW-1600/1600P Videocassette Player unit is
used as player 2. To create a final tape (a tape that contains
a completely packaged program) in Betacam format, use a
Betacam VCR such as the UVW-1800/1800P as the
recorder.
Notes
• This application requires the DSR-1500/1500P unit used
as the recorder to be fitted with the optional DSBK-
1504/1504P board.
• The DSR-1500/1500P units shown in the following
figure are fitted with the optional DSBK-1501, DSBK-
1503, and DSBK-1504/1504P boards.
The purpose of the following figure is to indicate the flow
of signals among the component devices in the system.
The specific connections and settings are described
beginning on page 85.
Connections for an A/B Roll Editing System
83