AEG BPE642020M User Manual page 18

18 www.aeg.com
4. Cover the core temperature sensor
with the remaining ingredients.
5. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
The display shows
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
6. Touch
temperature.
7. Touch
automatically after 5 seconds.
You can set the core
temperature only when
display but does not
flash before you set the
core temperature, touch
a new value.
8. Set the oven function and the oven
temperature.
flashing and the
or to set the core
or the settings save
flashes. If is in the
and or to set
The display shows the current core
temperature and the heat up symbol
When the dish is at the set core
temperature, an acoustic signal sounds
for 2 minutes and the value of the core
temperature and
deactivates.
9. Touch a sensor field to deactivate
the acoustic signal.
10. Remove the core temperature sensor
from the socket and remove the dish
from the appliance.
WARNING!
There is a risk of burns as the
core temperature sensor
becomes hot. Be careful
when you unplug it and
remove it from the dish.
9.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support .
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and deep pan together:
.
flash. The appliance