To Synchronize With The Status Of A Component - Sync-Up - Sony RM-AX4000 Operating Instructions Manual

5
Press the key(s) or button(s) you
want to operate.
When the signal is sent,
You can also use other buttons, such
as the VOLUME +/–, CHANNEL +/–,
MUTING, cursor, and MENU buttons.
6
When you are finished using the
Remote Commander, press the
COMMANDER OFF button.
COMMANDER
OFF
The Remote Commander turns off.
If you want to return to the
previous display
Press the BACK button, the previous LCD
display returns.
To synchronize with the status of
a component – SYNC-UP
appears.
X
PRESS
EPG
EXIT
SYSTEM CONTROL
The Remote Commander memorizes the
status of the components' input selectors,
and power on/off. However, if you turn
on/off the component manually or with
a different remote control, the Remote
Commander will not recognize the
current component status. In this case,
press the SYNC-UP button to
synchronize with the status of the current
component and the Remote Commander.
1
Press the SYNC-UP button.
SYNC-UP
The component you want to confirm
the status of appears as the Display
title.
LEARN
NG
COMMANDER
BACK COMPONENT SYNC-UP TIMER LIGHT OFF
VOLUME CHANNEL
MENU
OK
TOOLS
MUTING RECALL
1 2 3 4 MORE ALL OFF
SU
LEARN
TV
NG
AM
SET ON FOR POWER OF TV
SYNC-UP button
POWER
DONE
Continued
25