Sony RM-AV2100B Operating Instructions (primary manual) Operating Instructions Manual page 12

Setting the Code for Preset Audio
and Visual Components
(continued)
1
While pressing COMMANDER
OFF, press MUTING.
All the component names on the
display flash.
2
Press the Component Select
button for the desired component.
3
Press CHANNEL + or
CHANNEL –.
Press CHANNEL + to go to the next
code number.
Press CHANNEL – to go back to the
previous code number.
12
4
Aim the Commander at the
component and press the POWER
key.
When the remote control signal is
sent, is displayed on the display.
If it successfully works (power-off for
TV, power-on for VCR, DVD, SAT,
CBL, AMP, and playback for VD, CD,
MD, TAPE), go to Step 5.
If it doesn't, repeat Steps 3 and 4.
5
Press the ENTER key.
A beep sounds, and the code number
and "ENTER" appear twice.
Note
It is recommended to write down the code
number.
6
Press COMMANDER OFF.