Cleaning - U-Line Outdoor Series User Manual & Service Manual

USER GUIDE

Cleaning

EXTERIOR CLEANING
Vinyl Clad (Black or White) Models
Clean surfaces with a mild detergent and warm water
solution. Do not use solvent-based or abrasive cleaners.
Use a soft sponge and rinse with clean water. Wipe with a
soft, clean towel to prevent water spotting.
Clean any glass surfaces with a non-chlorine glass
cleaner.
Stainless Models
Stainless door panels, handles and frames can discolor
when exposed to chlorine gas, pool chemicals, saltwater or
cleaners with bleach.
Keep your stainless unit looking new by cleaning with a
good quality all-in-one stainless steel cleaner and pol-
ish monthly. For best results use Claire
Polish and Cleaner. Comparable products are acceptable.
Frequent cleaning will remove surface contamination that
could lead to rust. Some installations may require cleaning
weekly.
Do not clean with steel wool pads.
Do not use stainless steel cleaners or polishes on
any glass surfaces.
Clean any glass surfaces with a non-chlorine glass cleaner.
Do not use cleaners not specifically intended for
stainless steel on stainless steel surfaces (this
includes glass, tile, and counter cleaners).
If any surface discoloring or rusting appears, clean it
quickly with Bon-Ami or Barkeepers Friend Cleanser
®
a nonabrasive cloth. Always clean with the grain. Always
finish with Claire Stainless Steel Polish and Cleaner or
®
comparable product to prevent further problems.
Cleaning
Stainless Steel
®
and
®
NOTICE
The unit requires proper airflow to perform at its
highest efficiency. Do not block the front grille at
any time, or the unit will not perform as expected.
Do not install the unit behind a door.
For information on Keg and Tap Towers, please reference the
Single and Double Tap Tower Kits User Guide on
u-line.com.
Integrated Models
To clean integrated panels, use household cleaner per the
cabinet manufacturer's recommendations.
INTERIOR CLEANING
Disconnect power to the unit.
Clean the interior and all removed components using a mild
nonabrasive detergent and warm solution applied with a soft
sponge or non-abrasive cloth.
Rinse the interior using a sof sponge and clean water.
Do not use any solvent-based or abrasive cleaners.
These types of cleaners may transfer taste and/or odor to
the interior products and damage or discolor the interior.
NUGGET ICE MACHINE CLEANING CYCLE
This ice machine has an automatic clean alert function. The
control will indicate CL in the display, approximately every
six months with normal use, reminding you to clean your
CL
unit. When is displayed, ice production will continue.
Depending on water conditions, more frequent cleaning may
be necessary. Cleaning removes lime scale, other mineral
deposits, and sanitizes the machine. Poor ice quality and
reduced ice output are signs that cleaning is necessary. If
the machine consistently requires more frequent cleaning,
consult a plumber to test the water quality and recommend
appropriate treatment.
23
u-line.com