Changing Network Media Settings; Setting The Receiver Ip Address - Sony STR-LV700R Operating Instructions Manual

Changing Network Media settings

Setting the receiver IP
address
By default the receiver acquires an IP address
automatically. Use the following procedure to
specify an IP address, if necessary. Note that
when the receiver is used in a environment
containing a router, you should not specify the
receiver IP address (page 35).
1
On the main menu, select Settings,
and then press the SELECT button.
The Settings screen appears.
Settings
System Settings
TV Settings
Video Settings
Photo Settings
:Select :Return
2
Use / to select System
Settings, and then press the SELECT
button.
The System Settings screen appears.
3
to select IP Address, and
Use /
then press the SELECT button.
The IP Address screen appears.
Settings
IP Address
Obtain an IP address automatically (using router)
Obtain an IP address automatically (not using router)
Specify an IP address
Current Settings:
IP Address: 000 . 000 . 000
Subnet Mask: 000 . 000 . 000
OK CANCEL
:Select :Return
. 000
. 000
4
Use / to select Specify an IP
address, and then press the SELECT
button.
5
Use / / /
that you want to set, press the
SELECT button, Use
the numeric values of the IP address
and subnet mask, and then press the
SELECT button.
Tip
You can also press the ALT button so that it
lights, and then enter the value with the number
buttons on the remote.
6
Use / / /
then press the SELECT button.
Tip
When either Obtain an IP address automatically
option is selected, the IP address automatically
acquired appears.
to select the item
/ to enter
to select OK, and
77 GB