Programing The Cd Tracks; Program Play - Sony CMT-LS1 Operating Instructions Manual

Programing the CD
tracks

— Program Play

You can make a program up to 32 tracks from all
the CDs in the order you want them to be played.
1
1
2
4 5
7 8
10/0 >10
7
N X
–
4
.
m
1
Press FUNCTION repeatedly until
"CD" appears.
2
Press PLAY/TUNING MODE
repeatedly until "DISC PROGRAM"
appears.
3
Press DISC SKIP repeatedly to select
the desired CD.
4
Press . or > repeatedly until the
desired track appears in the display.
5
Press PLAY/TUNING MODE.
The track is programed.
2,5
3
6
9
3
+
x
–
x
+
>
M
+
–
6
To program additional tracks, repeat
steps 3 to 5.
You can make a program up to 32 tracks.
7
Press CD N.
All the programed tracks play in the order
you selected.
To cancel Program Play
Press PLAY/TUNING MODE repeatedly until
"PROGRAM" and "SHUFFLE" disappear from
the display.
To change the program
You can change the program before you start
playing.
To Do this
Do steps 1 and 2 then press x
Clear the entire
in stop mode.
program
Add a track to the Do steps 3 to 5.
program
To select the desired track using
number buttons
Press number buttons instead of performing steps
4 to 6.
To enter track numbers 11 or over, press >10 once
and then the number buttons of the track number.
For example, to select track 32, press >10 once,
then 3, and 2.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
CD N (or NX on the unit).
• "--.--" appears when the total playing time has
exceeded 100 minutes, or when you select a track
whose number is 21 or over.
• If you try to program 33 or more tracks, "FULL"
appears.
• You can also select a CD by using DISC 1 – 5 on
the unit in step 3.
17