Messages - Sony CMT-BX3R Operating Instructions Manual

Messages

CD/MP3 player, Tuner
CD OVER: You have reached the end of
the disc while pressing 
playback or pause.
COMPLETE
: The preset operation ended
normally.
INVALID: You pressed an invalid button.
LOCKED: The disc tray does not open.
Contact your nearest Sony dealer.
NO DISC: There is no disc in the system,
or you have loaded a disc that cannot
be played.
NO STEP: All of the programmed tracks
or files have been erased.
PUSH SELECT: You tried to set the clock
or timer during timer operation.
PUSH STOP: You pressed PLAY MODE

during playback.
READING: The system is reading
information of the disc. Some buttons
are not available.
SET CLOCK: You tried to select the timer
when the clock is not set.
SET TIMER: You tried to select the timer
when the Play Timer is not set.
STEP FULL: You tried to program more
than 26 tracks or files (steps).
TIME NG: The Play Timer start and end
times are set to the same time.
USB device
COMPLETE: The MP3 file or folder on
the USB device has been erased.
DEVICE FULL: The USB device is full.
ERASE ERROR: Erase of MP3 files or

folders on the USB device failed.
during
ERROR: The USB device could not be
recognized or an unknown device is
connected (page 25).
FATAL ERROR: The USB device was
disconnected while recording to or
erasing MP3 files or folders on the USB
device.
FLDR FULL: The number of folders
on the USB device has reached the
maximum.
INVALID: You have made an invalid or
currently prohibited operation.
NO DEVICE: No USB device is connected
or the connected USB device has been
stopped.
NO STEP: All of the programmed tracks
or files have been erased.
NO TRACK: No playable file is loaded in
the system.
NOT SUPPORTED: An unsupported
USB device is connected.
PLEASE WAIT: The system is readying
for usage of an USB device.
PROTECTED: You tried to record or
erase a write-protected USB device.
READING: The system is recognizing the
USB device.
REC ERROR: Recording did not start,
stopped partway, or otherwise could
not be performed (page 24).
REMOVED: The USB device has been
removed.
STEP FULL: You tried to program more
than 26 tracks or files (steps).
STORAGE DRIVE: USB storage media is
connected.
TRK FULL: The number of files on the
USB device has reached the maximum.

Continued

GB