Notification Settings; Login Settings - Panasonic KX-HNB700 User Manual

2
Tap [Access Point Settings] and select the desired access point.
3
Tap [System] ® [Firmware Update].
R Your device will connect to the Internet and check for a newer version of its firmware.
4
Follow the on-screen instructions.

Notification settings

You can select which types of status notifications are displayed, and which are not.
Important:
R In order to receive notifications, your mobile device must be connected to the Internet. If your mobile
device is not connected to a wireless network, a mobile network connection is required.
1
From the [HomeHawk] app home screen, tap
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [Notification].
4
Select the desired settings.
– [Recording Error]: Determines whether a notification is displayed when a recording error occurs.
– [Mode Change]: Determines whether a notification is displayed when a mode is changed.

Login settings

Configuring automatic login
You can specify whether or not you must enter a login password in order to connect to your devices while
away from home.
1
From the [HomeHawk] app home screen, tap
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [Login Settings] ® [Automatic Login].
4
To disable automatic login:
Slide the switch to the off position.
To enable automatic login:
Slide the switch to the on position, enter the password and then tap [OK].
R To display the characters that you have entered, turn on the [Show Password] checkbox.
Changing the login password
You can change the login password used in order to connect to your devices while away from home.
1
From the [HomeHawk] app home screen, tap
2
Tap [Access Point Settings] and select the desired access point.
3
Tap [Login Settings] ® [Change Login Password].
4
Enter the new password.
R To display the characters that you have entered, turn on the [Show Password] checkbox.
5
Tap [OK].
Using a front door camera and outdoor camera
® [Settings].
® [Settings].
® [Settings].
103