Reattaching The Refrigerator Doors; Disassembling The Flex Door - Samsung RF265A Series User Manual

2. Disconnect two connectors ( 2 ) on the left
side door. To remove the water coupler from
the hinge, twist and pull it from the hinge.
Remove the water line ( 3 ) while pressing the
marked part ( 4 ) of the water line coupler.
If a red clip is on the coupler, it must be
removed before removing the tube.
CAUTION
2
Red Clip
(1/4")
3
4
3. Pull and remove the hinge lever ( 5 ). Remove
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 7 ).
4. Lift the door straight up to remove.
5. Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 9 ) attached to the lower left and right door
hinges with an allen wrench (3/16"). Remove
the lower left and right door hinges ( 10 ).
DA68-02601A-16.indb 11
6
5
7
10
8
9
Allen wrench
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts
in reverse order.
1. The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
2. Insert the clip in the top plate and check that it
- TYPE A -
Center of transparent coupler
By placing the 3 screws again ensure
that the wires are in not to damage the
CAUTION
harness.

DISASSEMBLING THE FLEX DOOR

1. Take out the upper drawer by lifting it up.
2. Take out the lower basket ( 1 ) by lifting the
basket up from the rail system.
3. Press the fixing hook of rail system.
- TYPE B -
Dispenser
The Guide Lines
1
setting up _11
2018. 10. 8. 오후 4:32