Installation Instructions
Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: GEAppliances.ca
BEFORE YOU BEGIN
STOP
Read these instructions completely and
carefully.
IMPORTANT –
Observe all governing codes
and ordinances.
• Save these instructions for local inspector's use.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Completion time– 1 hour
•
installer.
•
covered under the Warranty.
WARNING
•
fuse or open circuit breaker before beginning
adapter plug with this appliance.
•
installations described in this booklet, gloves
and eye protection (safety glasses or equivalent)
should be worn.
•
head or body under disposer; unit could fall during
removal or installation.
•
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service
representative if you are in doubt that the appliance
is properly grounded.
• If house wiring is not 2-wire with ground, a ground
must be provided by the installer. When house
anti-oxidant compound and aluminum-to-copper
connectors.
49-5903-3
Be sure to leave these
Keep these instructions
Disposer
PREPARATION
2. Remove old disposer or sink flange assembly.
3. Inspect drain line. If it is heavily coated with
hardened grease and accumulations, rout out
with a plumber's snake.
4. Remove old sealing materials and gasketing from
sink opening, both top and bottom.
NOTE:
of any materials to prevent leaks.
WHAT YOU WILL NEED
screwdriver
ADDITIONAL MATERIALS YOU
MAY NEED
7