Listening To The Radio; Preset Tuning; Manual Tuning; Only - Sony CMT-NEZ7DAB Operating Instructions Manual

Listening to the radio

You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner's memory first
(see "Presetting radio stations" on page 13).
1
Press TUNER/BAND (or FUNCTION
repeatedly) to switch the function to
TUNER.
2
Press TUNER/BAND repeatedly to
select "DAB", "FM" or "AM".
You can also use the DAB button to select
DAB directly.
3
Press TUNING MODE repeatedly until
"PRESET" appears in the display.
4
Press + or – (or TUNING + or – on the
unit) repeatedly to select the desired
preset station.
Note
If there is no stored preset station, "No Preset" appears
(DAB only).
Listening to non-preset radio
station
— Manual Tuning (FM/AM bands only)
1
Press TUNER/BAND (or FUNCTION
repeatedly) to switch the function to
TUNER.
2
Press TUNER/BAND repeatedly to
select "FM" or "AM".
3
Press TUNING MODE repeatedly until
"AUTO" and "PRESET" disappear from
the display.
4
Press + or – (or TUNING + or – on the
unit) repeatedly to tune in the desired
station.
Note
When switching to CD function from tuner, a longer
time may be required to access the disc.
Tips
• To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available external
aerial.
• When an FM stereo program has static noise, press
FM MODE repeatedly until "MONO" appears.
There will be no stereo effect, but the reception will
improve.
• When a stereo FM program cannot be received in
stereo, press FM MODE repeatedly until "STEREO"
appears in the display.
• Press TUNING MODE repeatedly until "AUTO"
appears in step 3 above, then press + or – (or
TUNING + or – on the unit). The frequency
indication changes and scanning stops when the
system tunes in a station (Automatic Tuning).
• To record the radio programs, use manual recording
(page 18).
• You can change the display into the clock display
(for 8 seconds) by pressing DISPLAY.
• "SECONDARY" appears in the display when
receiving secondary service (DAB only).
• Primary service is automatically received when
secondary service ends.
GB
15