USB bracket, I/O board
Description
USB bracket
Before removing the USB bracket from the I/O board, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the I/O board (see
Remove the USB bracket from the I/O board:
1.
Remove the Phillips M2.0×4.0 screw (1) that secures the USB bracket to the I/O board.
2.
Remove the bracket from the I/O board (2).
Reverse this procedure to install the USB bracket onto the I/O board.
32
Chapter 5 Removal and replacement procedures
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page
20).
USB bracket, I/O board on page
Spare part number
L36909-001
18).
18).
32).