NEC UNIVERGE SL2100 Manual page 16

UNIVERGE SL2100 Release 1.8 Overview
System Command Programming
The following commands are made available to allow TLS functionality:
84-20-07 TLS Registrar/Proxy Port
Select the port to use for the TLS Protocol. Permitted values 0-65535 (Def: 0, disabled).
10-72-01 Server Certificate
Enter the Server certificate file name, this will be a .pem file, so entry will be xxxxxxx.pem where
xxxxxxx would become the filename to use. Further details later in this section.
10-72-02 Private Key
Enter the Private key file name, this will be a .key file, so entry will be xxxxxx.key where xxxxxx would
become the filename to use. Further details later in this section.
84-27-03 SRTP Mode
To encrypt voice packets, it is necessary to set SRTP Mode (PRG84-27-03 "1: enable").
- While SRTP Mode is effective, the upper limit value of the VoIP resource decreases.
- When the user changes SRTP Mode setting the VoIPDB is reset.
 Copyright 2019 NEC Enterprise Solutions
16 of 34
Exclusively for use by NEC Enterprise Solutions channel partners
All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner.