Outline - Mitsubishi Electric FR-D700 Series Instruction Manual

1 OUTLINE

1.1 Product checking and parts identification
Unpack the inverter and check the capacity plate on the front cover and the rating plate on the inverter side face to ensure that
the product agrees with your order and the inverter is intact.
Inverter model
FR -
Symbol Voltage class
Three-phase 200V class
D720
Three-phase 400V class
D740
Single-phase 200V class
D720S
Single-phase 100V class
D710W
Cooling fan
The cooling fan is removable.
Operation panel
(Refer to page 2)
Voltage/current input switch
(Refer to page 8)
PU connector
(Refer to page 8)
Front cover
Refer to the
Instruction Manual
(Applied) for installation/
removal.
Capacity plate
1.5K
Inverter model
 Accessory
· Fan cover fixing screws (M3  35mm)
These screws are necessary for compliance with
the EU Directive. (Refer to page 46)
Capacity
1.5K to 3.7K
5.5K to 15K
REMARKS
· For how to find the SERIAL number, refer to page 50.
-
D740 1.5 K
Represents the
inverter capacity [kW]
Serial number
Quantity
1
2
Rating plate
Inverter model MODEL
INPUT
Input rating
OUTPUT XXXXX
Output rating
SERIAL
Serial number
Country of origin
MADE IN JAPAN
Control logic switchover jumper
connector
The jumper connector is in the sink
logic (SINK) when shipped from the
factory. Move the jumper connector
to change to the source logic
(SOURCE). Always fit the jumper
connector to the either position.
( Refer to the Instruction Manual
(Applied))
Control circuit terminal block
(Refer to page 9)
Main circuit terminal block
(Refer to page 9)
Combed shaped wiring cover
Refer to the Instruction
Manual (Applied) for installation/
removal.
INVERTER
PASSED
FR- D740 -1.5K
XXXXX
SAMPLE
1
1