Power Adaptor - Sony SNC-M3 Quick Start Manual

Adobe, Acrobat and Acrobat Reader are trademarks of Adobe
•
Systems Incorporated in the United States and/or other
countries.
All other company and product names are trademarks or
•
registered trademarks of the respective companies or their
respective makers.
3
Connect the Camera to the Router
To make the network setting on the camera, connect the
camera to the router using a commercially available
network cable. The setting of the camera should be
performed using the computer connected to the router.
Notes
• Before setting, turn on the power of the router and
computer and connect them to the Internet.
• Use a commercially available category 5, straight network
cable.
• The illustrations used in this guide show the SNC-M1
network camera.
1
Remove the cap of the camera.
2
Connect the network cable to the LAN
jack on the router.
3
Connect the network cable to the
(network) port on the camera.
Camera
!
m 5
to
Network cable
(straight)
4
1
2
3
4
Router
to LAN
After connection, place back the cap of the camera.
(10BASE-T/
100BASE-TX)
Connect the Camera to the Router / Turn on the Power of the Camera
Turn on the Power of the Camera
Insert the DC plug of the supplied AC
power adaptor into the DC IN 5V jack
on the camera.
Connect the power cord to the AC

power adaptor.

Plug the power cord to a wall outlet.
Camera
!
5
m
1
to DC IN 5V
AC power adaptor
(supplied)
3
Check that the POWER indicator
flashes, then stays lit.
POWER indicator
The camera is now turned on.
2
to a wall outlet
Power cord
(supplied)
to the adaptor
3