Replacing The Base Cover; Procedure - Dell XPS 15 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Place the base cover on the palm-rest assembly and snap it into place.
2 Replace the 10 screws (M2x3 T5) that secure the base cover to the palm-rest assembly.
3 Replace the two screws (M2x8.5) that secure the base cover to the palm-rest assembly.
4 Turn the system badge over, and snap it into place.
5 Turn the computer over.
14

Replacing the base cover

GUID-27446428-82D7-4881-9220-9EB090B046EA
Released
computer. After working inside your computer, follow the instructions in
GUID-F113D502-95A9-448F-AB1C-F07A96526541
Released
Replacing the base cover
After working inside
www.dell.com/
4